- Joined
- Jun 20, 2015
- Messages
- 7
- Motherboard
- Dell Optiplex 755-DT
- CPU
- Intel Core 2 Duo E8200 2.66 GHz
- Graphics
- Diamond ATI Radeon HD 3450 SB Edition 512 MB
- Mac
- Classic Mac
- Mobile Phone
I am using an old Dell Optiplex 755 to make my first hackintosh.
The specs are as follows:
Intel Core 2 Duo E8200 2.66 GHz
2GB DDR2 RAM 2 dimms
Dell Optiplex 755 DT motherboard
I am not able to reach Chimera when my hard drive is connected. It gets stuck at a screen displaying "\". Without the hard drive installed, I was able to reach the installer. Now I have to enter -v -x npci=0x2000 cpus=1 dart=0 PCIRoodUID=1 and GraphicsEnabler=No to reach Yosemite. Adding the hard drive in makes it not work again, and I obviously can't install OS X to the hard drive when the cable isn't connected.
Any suggestions would be appreciated. Thanks.
The specs are as follows:
Intel Core 2 Duo E8200 2.66 GHz
2GB DDR2 RAM 2 dimms
Dell Optiplex 755 DT motherboard
I am not able to reach Chimera when my hard drive is connected. It gets stuck at a screen displaying "\". Without the hard drive installed, I was able to reach the installer. Now I have to enter -v -x npci=0x2000 cpus=1 dart=0 PCIRoodUID=1 and GraphicsEnabler=No to reach Yosemite. Adding the hard drive in makes it not work again, and I obviously can't install OS X to the hard drive when the cable isn't connected.
Any suggestions would be appreciated. Thanks.