Half way to booting Yosemite... Freezes

[Rweakins]

Please help!!! Half way to booting Yosemite... Freezes

I'm trying to upgrade from Mavericks to Yosemite and am having trouble getting the system to boot off my HDD after building my Mutlibeast settings.

Hardware:
Gigabyte ga-h87n-wifi v2
msi gtx 760 4gb
samsung evo 840 x2

Process:
-I made a bootable usb with the yosemite installer using unibeast
-optimized BIOS settings before install
-booted to usb and selected USB (only needed -x to get to installer)
-installed on drive currently holding Mavericks
-restarted and booted onto usb again and entered the Mavericks drive and this is where is gets weird. I only used -x and IGPEnabler=1 and it gets to yosemite. When it does the screen flashes three or four times like a white wipe transition from the top then it settles down.
-I log in, any app I open (chrome for example, the window it's in does the wipe animation every time I click a new page or tab)
-I run Multibeast choosing drivers and configurations I pulled from other successful builds with comparable hardware
-choose install and it says install succeeded
-I shut down and remove usb
-power on and choose to boot to Yosemite drive
-apple screen with loading bar comes up and it never gets past half way...

This is the result trying to boot with -v

http://i.imgur.com/hVWuyXr.jpg


Any suggestions on ways to fix this? I've tried reinstalling and doing it over but got the same result.

Thanks in advance

 

[Rweakins]

Anyone know from the picture what's wrong?

 

[P1LGRIM]

Anyone know from the picture what's wrong?

It's a deadbeef error - Use Search for more info.

Try adding maxmem=4096 to your boot flags.

 

[Rweakins]

It's a deadbeef error - Use Search for more info.

Try adding maxmem=4096 to your boot flags.

This is the result of that:

 

[P1LGRIM]

This is the result of that:

View attachment 130606

Ok, now it's graphics.

Ensure VT-d is disabled in your BIOS.
Connect to your monitor with a digital connection - DVI or HDMI - VGA is not supported.

 

[Rweakins]

I had it disabled but I guess it reverted.

Heres the result of that with -v and maxMem=4096

http://i.imgur.com/hRTGJzK.jpg

Are the boot options case sensitive?

 

[P1LGRIM]

I had it disabled but I guess it reverted.

Heres the result of that with -v and maxMem=4096

http://i.imgur.com/hRTGJzK.jpg

Are the boot options case sensitive?

Boot flags are case sensitive - maxMem=4096 is wrong - Use maxmem=4096

 

[Rweakins]

I actually did. Autocorrect changed it

 

[Rweakins]

I used -v nv_disable=1 -no-zp and ncpi=0x2000 and got the follow.

http://i.imgur.com/3djBQqh.jpg

It it stayed at that screen for a minute or two then booted into Yosemite. Not sure if that means I'm ok or not.

Anyone?

 

[Jithin.C.V]

I had it disabled but I guess it reverted.

Heres the result of that with -v and maxMem=4096

http://i.imgur.com/hRTGJzK.jpg

Are the boot options case sensitive?

The picture is not taken while using only the flags "-v maxmem=4096", i can see that from the image you are using the flag "nv_disable=1" too.


Try booting with "dart=0 -v -f maxmem=4096 GraphicsEnabler=No IGPEnabler=No". Post result.


Good Luck...!