Guide to install Lion on Z68X-UD3H-B3 and ATI HD 6870

[luminol]

going to try this now , any updates on sleep problem , or rest of the probs ?

 

[r4man2]

I have this motherboard, but haven't found a DSDT for the F8 firmware version. What firmware version do you have?

Thanks

 

[partimers]

Anybody with sleep working? Not me. I am using a patched DSDT.aml extracted from my system. This is working flawlessly under Snow Leopard (have two Mac OS X partitions).

Tried the AppleRTC pathing trick as well without success, more info here http://www.insanelymac.com/forum/index.php?showtopic=253992&st=429#. This worked perfectly for Lion on my other machine which has a GA-EP45-UD3L :/

No sleep is a dealbraker for me. Staying in Snow Leopard for that.

 

[Raven283]

Thanks for this guide! worked great with:

- Z68X-UD3H-B3
- intel 2600K
- 2x 6870 (installed them after upgrading to Lion)
- 16GB DDR3 (used only 4 during install just to be safe)

Everything works except for USB3.0 (don't care for the moment so I haven't tried to get it working).

 

[partimers]

Thanks for this guide! worked great with:

- Z68X-UD3H-B3
- intel 2600K
- 2x 6870 (installed them after upgrading to Lion)
- 16GB DDR3 (used only 4 during install just to be safe)

Everything works except for USB3.0 (don't care for the moment so I haven't tried to get it working).

Got sleep working properly?

 

[Stork]

On your initial setup, did you change any BIOS parameters, such as in the tonymacx86 iBoot+MultiBeast Installation Guide? (See link in my signature block.)

 

[Raven283]

Thanks for this guide! worked great with:

- Z68X-UD3H-B3
- intel 2600K
- 2x 6870 (installed them after upgrading to Lion)
- 16GB DDR3 (used only 4 during install just to be safe)

Everything works except for USB3.0 (don't care for the moment so I haven't tried to get it working).

Got sleep working properly?

I've put it to sleep once and it woke up fine, but not as fast as windows does so don't know if its really working as its supposed to.

 

[mariasan29]

Hi
I have a same Mobo. GA-Z68X-UD3H-B3 F8 Bios

CPU:Core i7 2600K
MEM:16GB
VGA:GTX260
NIC:Marvell Yukon 88E8053 PCIex x1


I tried to edit DSDT.aml for My Mobo

This was considered to reference.
http://macmanx86.blogspot.com/2011/07/minimal-dsdt-edits-for-gigabyte-socket.html

Now working "sleep by power button " ,sound,USB2.0,GraphicsIt is moving normally.
Is a file attached? "dsdt.aml"