- Joined
- Apr 3, 2013
- Messages
- 4
- Mac
- Classic Mac
- Mobile Phone
[GUIDE]ML 10.8.3 / GIGABYTE GA-B75M-D3H / i7 3770k / ATI HD 6870 / 16Gb (w/out DSDT)
My Hackintosh
GA-B75M-D3H
Intel Core i7 3770k
16gb Samsung M379B5273DH0-YK0 (4GB each)
3TB Seagate Barracuda ST3000DM001
PowerColor ATI Radeon HD 6870
2TB WDC WD20EARX (Windows 7)
Instructions:
Bios:
Load Optimised Defaults
Peripherals>Sata Mode Selection>AHCI
Reboot
Insert Unibeast 1.71 USB with ATI6000Controller.kext removed from System/Library/Extensions (Hidden)
Boot Unibeast USB with GraphicsEnabler=No
At MAC OS X Install screen go to:
Disk Utilities
Select drive. Make 1 Partition named Mountain Lion. Options select GUID and MAC OS Extended.
Apply
Exit
Install ML 10.8.3 to Mountain Lion Partition
Reboot
Boot Unibeast USB and Select Mountain Lion with GraphicsEnabler=No
Unhide files in Mac OS
Copy "Post Install" folder from Unibeast USB to Desktop
You should be able to see or have on your desktop Multibeast, KextBeast, Chimera 2.0.1,AHCISeries7Injector.kext and ATI6000Controller.kext (hidden)
Open MultiBeast:
Select UserDSDT or DSDT - Free
Audio - Without DSDT - ALC887 / 888b - v100302 Current
Disk - IOAHCIBlockStorageInjector (Show internal drives)
Network - AppleRTL8169Ethernet 2.0.6 for 10.7
Install and Reboot to Unibeast USB. Select Mountain Lion with GraphicsEnabler=No
Open KextBeast.pkg and Install
This is going to install AHCISeries7Injector.kext and ATI6000Controller.kext from the Desktop
Reboot Unibeast USB. Select Mountain Lion NO Need for the GraphicsEnabler now. yay!
This part will fix the boot0: error if you try to boot to Mountain Lion without using Unibeast USB
Download unpkg
Open unpkg and drag Chimera 2.0.1 into it
Its going to create a folder on the desktop called Chimera 2.0.1
Close unpkg
Go to the folder Chimera 2.0.1/usr/standalone/i386 and copy boot1h into a USB drive top/root folder (it can be in the Unibeast USB)
Reboot to Unibeast USB and go to the Mac OS X install screen
Go to Disk Utilities and Unmount the partition Mountain Lion
exit, open Terminal and type:
diskutil list
copy the identifier for the Mountain Lion partition (disk0s2 in my case)
type:
cd /Volumes/"USB" (USB is the name of the USB. Use the "")
dd if=boot1h of=/dev/disk0s2 (replace disk0s2 with your identifier from above)
reboot Unibeast USB and select Mountain Lion
Install Chimera 2.0.1pkg
Reboot now you should boot to Mountain Lion Drive normally without any flags
Enjoy
My Hackintosh
GA-B75M-D3H
Intel Core i7 3770k
16gb Samsung M379B5273DH0-YK0 (4GB each)
3TB Seagate Barracuda ST3000DM001
PowerColor ATI Radeon HD 6870
2TB WDC WD20EARX (Windows 7)
Instructions:
Bios:
Load Optimised Defaults
Peripherals>Sata Mode Selection>AHCI
Reboot
Insert Unibeast 1.71 USB with ATI6000Controller.kext removed from System/Library/Extensions (Hidden)
Boot Unibeast USB with GraphicsEnabler=No
At MAC OS X Install screen go to:
Disk Utilities
Select drive. Make 1 Partition named Mountain Lion. Options select GUID and MAC OS Extended.
Apply
Exit
Install ML 10.8.3 to Mountain Lion Partition
Reboot
Boot Unibeast USB and Select Mountain Lion with GraphicsEnabler=No
Unhide files in Mac OS
Copy "Post Install" folder from Unibeast USB to Desktop
You should be able to see or have on your desktop Multibeast, KextBeast, Chimera 2.0.1,AHCISeries7Injector.kext and ATI6000Controller.kext (hidden)
Open MultiBeast:
Select UserDSDT or DSDT - Free
Audio - Without DSDT - ALC887 / 888b - v100302 Current
Disk - IOAHCIBlockStorageInjector (Show internal drives)
Network - AppleRTL8169Ethernet 2.0.6 for 10.7
Install and Reboot to Unibeast USB. Select Mountain Lion with GraphicsEnabler=No
Open KextBeast.pkg and Install
This is going to install AHCISeries7Injector.kext and ATI6000Controller.kext from the Desktop
Reboot Unibeast USB. Select Mountain Lion NO Need for the GraphicsEnabler now. yay!
This part will fix the boot0: error if you try to boot to Mountain Lion without using Unibeast USB
Download unpkg
Open unpkg and drag Chimera 2.0.1 into it
Its going to create a folder on the desktop called Chimera 2.0.1
Close unpkg
Go to the folder Chimera 2.0.1/usr/standalone/i386 and copy boot1h into a USB drive top/root folder (it can be in the Unibeast USB)
Reboot to Unibeast USB and go to the Mac OS X install screen
Go to Disk Utilities and Unmount the partition Mountain Lion
exit, open Terminal and type:
diskutil list
copy the identifier for the Mountain Lion partition (disk0s2 in my case)
type:
cd /Volumes/"USB" (USB is the name of the USB. Use the "")
dd if=boot1h of=/dev/disk0s2 (replace disk0s2 with your identifier from above)
reboot Unibeast USB and select Mountain Lion
Install Chimera 2.0.1pkg
Reboot now you should boot to Mountain Lion Drive normally without any flags
Enjoy