- Joined
- Nov 17, 2009
- Messages
- 7,366
- Motherboard
- Z370N WIFI
- CPU
- i7 8700K
- Graphics
- HD 630
- Mac
- Classic Mac
- Mobile Phone
Just a quick update on an older system originally built for OS X Lion running the latest OS X El Capitan perfectly. The Sandy Bridge CustoMac Mini 2011 GA-H67N-USB3-B3 - Core i3-2105 - HD 3000 Graphics. The original posts are here:
http://www.tonymacx86.com/lion-desk...-customac-mini-2011-guide-notes-progress.html
http://tonymacx86.blogspot.com/2011/09/building-sandy-bridge-customac-customac.html
This little system has been a great workhorse for testing over the years- I’ve also used it connected to the TV. For OS X El Capitan UniBeast installation, use the main guide. If you have trouble booting the standard USB, recreate it by formatting first with MBR partition format. This will install Clover using Legacy Boot Mode to the root of the USB.
BIOS settings:
Disable USB 3.0 under Integrated Peripherals. NEC/Renesas USB 3.0 ports are not working- there is no current solution for OS X El Capitan as of this post. The system drive will not boot unless you disable USB 3.0 in BIOS.
MultiBeast settings:
OLD METHOD:
Instead of installing to the EFI partition with Legacy Boot Mode, Clover can be installed to the root of the system drive by using either Legacy Boot Mode - Root package from El Capitan Post-Install Tools.
After installing Clover, use the following fix for HD 3000 graphics. We'll be adding this fix to MultiBeast.
http://www.tonymacx86.com/graphics/...raphics-fix-os-x-el-capitan-using-clover.html
Clover config.plist:
http://www.tonymacx86.com/lion-desk...-customac-mini-2011-guide-notes-progress.html
http://tonymacx86.blogspot.com/2011/09/building-sandy-bridge-customac-customac.html
This little system has been a great workhorse for testing over the years- I’ve also used it connected to the TV. For OS X El Capitan UniBeast installation, use the main guide. If you have trouble booting the standard USB, recreate it by formatting first with MBR partition format. This will install Clover using Legacy Boot Mode to the root of the USB.
BIOS settings:
Disable USB 3.0 under Integrated Peripherals. NEC/Renesas USB 3.0 ports are not working- there is no current solution for OS X El Capitan as of this post. The system drive will not boot unless you disable USB 3.0 in BIOS.
MultiBeast settings:
OLD METHOD:
Instead of installing to the EFI partition with Legacy Boot Mode, Clover can be installed to the root of the system drive by using either Legacy Boot Mode - Root package from El Capitan Post-Install Tools.
After installing Clover, use the following fix for HD 3000 graphics. We'll be adding this fix to MultiBeast.
http://www.tonymacx86.com/graphics/...raphics-fix-os-x-el-capitan-using-clover.html
Clover config.plist: