Contribute
Register

[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

Status
Not open for further replies.
Build one from scratch for Big Sur without using the OC one for Catalina. But I hit the following and it hangs there forever

View attachment 498394

I have been searching if this is known. The closest I can get is on ****** that some Z97 Haswell motherboard will have this problem. Mine is also a Haswell cpu but not sure if it is related.
Just an update to myself. I follow some other advice that it is normal and let it stuck there for another 20 minutes. Eventually it moves forward and brings up the Big Sur installation screen. I didn't do the upgrade as people said the upgrade takes very long. I will do the upgrade some other time.
 
I'm too.
Today install Catalina on another hdd.
Dont work wi-fi, BT and battery.
Next few day will be patching ))
Here is I found new manual how to install Big Sur on our laptops, but I haven't used it yet

 
If anybody is interested .....

I have my HP 440 G5 now with Open Core 0.6.3 and BigSur full Working, except Shutdown / Restart RTC Time Error of Message and one extra Restart from Bios, but could not care less for now........

Freaking fast with even Turbo deactivated in Bios, cause the need of Silence ;-)

EFI Attached ;-)

do not forget to edit new Serial SMBIOS MacbookPro14,1
And remove the WLAN Kext if not using USB Wlan Stick.

@St1g

Used that Driver from Chris1111

But did not use

CSRUTIL Command working in that config:

NVRAM Add
00000000 - SIP completely enabled
30000000 - Allow unsigned kexts and writing to protected system file locations
67000000 - SIP completely disabled

What makes it work:
NVRAM Delete
7C436110-AB2A-4BBB-A880-FE41995C9F82 --> 1 --> String --> csr-active-config

This is what you need if installing the USB WLAN driver, did not figure out that Boot to Rescue with OC ?
But hey, it is easier that way ;-)

Better deactivate some of the Trackpad Gestures, than it works flawless in that Problematic Synaptics Field

Audio only Headphone Out for Now, but will figure that out..........

Sleep Works........
 

Attachments

  • Bildschirmfoto 2020-11-29 um 20.23.51.jpg
    Bildschirmfoto 2020-11-29 um 20.23.51.jpg
    33.3 KB · Views: 65
  • Bildschirmfoto 2020-11-29 um 20.22.57.jpg
    Bildschirmfoto 2020-11-29 um 20.22.57.jpg
    74.8 KB · Views: 60
  • Bildschirmfoto 2020-11-29 um 20.22.27.jpg
    Bildschirmfoto 2020-11-29 um 20.22.27.jpg
    82.9 KB · Views: 59
  • EFI-OpenCore-HP440G5.zip
    8 MB · Views: 72
  • GenSMBIOS-master.zip
    221.2 KB · Views: 48
  • Wireless USB OC Big Sur Adapter-V5.zip
    17 MB · Views: 57
Last edited by a moderator:
Here is I found new manual how to install Big Sur on our laptops, but I haven't used it yet

Yes. I did it!
Thanx for link!
Not work: Wi-Fi, BT (Atheros, i dont have broadcom card). But for me dont nedeed. I use Lan cable.
External monitor working after replace some setting in config.
Now working at old hdd, but i wont transfer to sdd with Carbon copy cloner.
Usually after testing, I do this.

Screenshot 2020-11-30 at 17.39.45.png
 
I have finally finished my OpenCore setup for HP Probook 450 G5
Removed almost everything from the original rehabman's guide, and now I can confirm that everything is working almost perfect. Also, updated to Big Sur with no problem

View attachment 497360

Can you share your OpenCore EFI Folder? I am new on this (first time hackintosh). I came to part regarding SSDTs / DSDTs and ACPI and config.plist . I am trying to understand this but some stuff are currently weird for me.
 
Sure



This can be fixed with SSDT patch
Works, but you have a HP450G5 right ?

so I only integrated the RTC related .aml

Did you manage to make Speaker work ?

I have only Audio on Headphone out, you have no DeviceProperties ->Add-> PciRoot(0x0)/Pci(0x1F,0x3), but in UEFI together with AudioDxe.efi does that work ?
 
Status
Not open for further replies.
Back
Top