RehabMan
Moderator
- Joined
- May 2, 2012
- Messages
- 181,011
- Motherboard
- Intel DH67BL
- CPU
- i7-2600K
- Graphics
- HD 3000
- Mac
- Mobile Phone
Mr. Rehabman, please help me to checking what is wrong with my dsdt patching for battery status... I am following your guide from the first post, I am convert any 16 bit into 8 bit, breaking into low and high...after compile and put dsdt into extra folder (i am using enoch boot loader)..my battery status is show up...charging and discharging detection work correctly, but the percentage not working normally (some time jumping into 100% or stuck 99% while charging and when discharging the percentage is not decrease correctly, remaining time shown 0:00)
Behaviour percentage while charging is from 0% jump to 20% jump to 40%, (add 20% everytime update), while discharging 100% down to 80%...(minus 20% everytime update)..so weird..
On the system Information..at power section..another miss behave is Full Charge Capacity (mAh) = 5
With this kind of problem, i don't know with part of dsdt i have to look up to make another correction...please your guidance , tx before
attach original dsdt,patch dsdt and ioreg
The patches you made to the patched DSDT are wrong. Read post #1 or look for an existing patch that matches your DSDT.