[GUIDE] GA-P67A-D3-B3 rev2.0 / i5 3570 / HIS HD 7850

[Ritey]

Yes I installed Clover into a SD card, If you want, try my Chameleon boot.plist, only key I think you need to change is the ATIConfig which is the framebuffer.

I have done some GPU benchmark:
Luxmark Sala: I get 1015
Cinebench: 40.33 fps

I think I got nice results!

-----------------------------

Yes, excellent results!

I have the Radeon 7950 with four ports, which I believe is also what you have.

Should I install Chameleon on my SSD, and edit the plist?

Ritey

 

[delirio]

-----------------------------

Yes, excellent results!

I have the Radeon 7950 with four ports, which I believe is also what you have.

Should I install Chameleon on my SSD, and edit the plist?

Ritey

Yes, If you want

 

[Ritey]

Yes, If you want

------------------

OK.

I used your addition to plist.org (removed duplicate entries).

Then, I installed Chameleon onto OS x boot drive.

Before rebooting, I installed Chameleon Wizard.

I have ten hard drives (3 SSd, 7 platters).

Dual Boot Windows Seven off a separate SSD from OS x.

I selected 'Boot0md' since there are two operating systems on two separate SSDs.

Everything working - EVEN SLEEP! OS x goes to sleep by itself, and wakes when the mouse is pushed.

Also, the reason I got the white screen on the first boot was that the IGPx integrated video boots first for about five seconds, then the Ati 7950 initializes. I am using a 27" HP monitor and the resolution is fantastic.

I will have to do some benchmarks.

Ritey ..

Note: When Boot0md is selected, Chameleon is installed onto both partitions of the boot drive, including the extra FAT partition.

 

[Ritey]

I have done some GPU benchmark:

Luxmark Sala: I get 1015
Cinebench: 40.33 fps

I think I got nice results!

=================

MY LuxmarkSala: 1577 - AMD Radeon GPU Compute Engine [GPU, 32, 880, Mhz)

[OpenCL device::AMD Radeon HD 7950 Compute EngineIntersect] Ray buffer size: 3072Kbytes
2013-04-10 10:20:45 - [LuxRays] [OpenCL device::AMD Radeon HD 7950 Compute EngineIntersect] Ray hits buffer size: 1024Kbytes
2013-04-10 10:20:45 - [LuxRays] [OpenCL device::AMD Radeon HD 7950 Compute EngineIntersect] OpenCL image support is available
2013-04-10 10:20:45 - [LuxRays] [OpenCL device::AMD Radeon HD 7950 Compute EngineIntersect] OpenCL max. image buffer size: 8192x8192
2013-04-10 10:20:45 - [LuxRays] [OpenCL device::AMD Radeon HD 7950 Compute EngineIntersect] QBVH node image buffer size: 756x750
2013-04-10 10:20:45 - [LuxRays] [OpenCL device::AMD Radeon HD 7950 Compute EngineIntersect] QBVH triangle image buffer size: 1270x1269
2013-04-10 10:20:45 - [LuxRays] [OpenCL device::AMD Radeon HD 7950 Compute EngineIntersect] Enabled QBVH scene storage inside image
2013-04-10 10:20:45 - [LuxRays] [OpenCL device::AMD Radeon HD 7950 Compute EngineIntersect] QBVH max. stack size: 24
2013-04-10 10:20:45 - [LuxRays] [OpenCL device::AMD Radeon HD 7950 Compute EngineIntersect] QBVH Image Storage kernel work group size: 256
2013-04-10 10:20:45 - [LuxRays] [OpenCL device::AMD Radeon HD 7950 Compute EngineIntersect] Suggested work group size: 256
2013-04-10 10:20:45 - [LuxRays] [OpenCL device::AMD Radeon HD 7950 Compute EngineIntersect] Forced work group size: 64
2013-04-10 10:20:45 - [RenderEngine] [PathOCLRenderThread] OpenCL task count: 65536

For some reason though, Unique Heaven will only run in a garbled screen.

Haven't tried Cinebench yet.

 

[delirio]

=================

MY LuxmarkSala: 1577 - AMD Radeon GPU Compute Engine [GPU, 32, 880, Mhz)




For some reason though, Unique Heaven will only run in a garbled screen.

Haven't tried Cinebench yet.

good

 

[RMJ114]

=================

MY LuxmarkSala: 1577 - AMD Radeon GPU Compute Engine [GPU, 32, 880, Mhz)




For some reason though, Unique Heaven will only run in a garbled screen.

Haven't tried Cinebench yet.

AA isn't working right. Run a custom Heaven run without AA enabled and it will be fine.

 

[Robad]

Hi, why can I not to use hd7850 for install? It doesn't work even in safe (-x) mode?

 

[iamniceify]

Can you guys help me out? I current have mac installed on my HDD booting it with HD graphic 3000

I have installed the kexts and mutibeast and put the forgot the app into my startup

I still dun get it the bootloader part. I only have 1 partition which is mac. Can i still install on my hdd? or i need to create another partition

 

[Adrian B]

Can you guys help me out? I current have mac installed on my HDD booting it with HD graphic 3000

I have installed the kexts and mutibeast and put the forgot the app into my startup

I still dun get it the bootloader part. I only have 1 partition which is mac. Can i still install on my hdd? or i need to create another partition

Can you boot to the desktop without using the USB stick?


Adrian B

 

[iamniceify]

I havent install any bootloader yet . Am stuck here and confuse.

For some reason i use disk utility and format my pen drive and its not appearing on the chameleon wizard