[Guide] Elitebook 8570W （ Discrete graphics ）Using clover hot Patch Install OS X 10.11.6

[hongchangwei]

HP EliteBook 8570W using clover UEFI hot Patch OXS10.11.6

My English is not good, so try to be simple

1) Good Clover u disk boot disk because 8570w with a separate video card, so use this profile-boot installation, and install EFI

config.plist fro install
EFI For usb install

2) After the system successfully installed, install clover, ACPI F4 extract, Parth and kext can copy the following EFI

clover downloads


3) 8570w Required Drive
I like to use kextbeast install
All drives KEXTS
My later stable EFI file

＊＊＊＊＊4）Because, the previous method, and AppleHDA Patcher generated counterfeit sound card, in the use of the process, there will be unstable phenomenon, the specific reason is not very understand
theis
linux Extraction of sound codec.text

 

[hongchangwei]

With AppleALC .kext//Lilu.kext Drive,,, the hardware inside as if the drive succeeds, but has no equipment

PinDefaultCodec: IDT 92HD81B1X5
Address: 0
Vendor Id: 0x111d7605
(layout id = 3/12/20/21/28)

View attachment 307001 View attachment 307002

View attachment 307001View attachment 307002

 

[RehabMan]

With AppleALC .kext//Lilu.kext Drive,,, the hardware inside as if the drive succeeds, but has no equipment

PinDefaultCodec: IDT 92HD81B1X5
Address: 0
Vendor Id: 0x111d7605
(layout id = 3/12/20/21/28)

View attachment 307001 View attachment 307002



？？？？？？？？？
layout 3

00a71c20 00a71d10 00a71ea1 00a71f01

00b71c10 00b71d10 00b71e21 00b71f01

00d71c30 00d71d00 00d71e17 00d71f90

00e71cf0 00e71d00 00e71e00 00e71f40

00f71c40 00f71d00 00f71e00 00f71f40

01071c50 01071d00 01071e00 01071f40

01171c60 01171d00 01171ea3 01171fd0

01f71c70 01f71d00 01f71e00 01f71f40

02071c80 02071d00 02071e00 02071f40



layout 12

00c71e81 00c71f03

01171ea0 01171f90



layout 20

00a71c20 00a71d10 00a71e81 00a71f01

00b71c50 00b71d10 00b71e21 00b71f01

00d71c30 00d71d01 00d71e10 00d71f90

00e71cf0 00e71d00 00e71e00 00e71f40

00f71cf0 00f71d00 00f71e00 00f71f40

01071cf0 01071d00 01071e00 01071f40

01171c10 01171d01 01171ea0 01171f90

01f71cf0 01f71d00 01f71e00 01f71f40

02071cf0 02071d00 02071e00 02071f40

00c71cf0 00c71d00 00c71e00 00c71f40



Layout 21

00c71c20 00c71d10 00c71e81 00c71f01

00b71c50 00b71d10 00b71e21 00b71f01

00f71c30 00f71d01 00f71e10 00f71f90

00e71cf0 00e71d00 00e71e00 00e71f40

00d71cf0 00d71d00 00d71e00 00d71f40

01071cf0 01071d00 01071e00 01071f40

01171c10 01171d01 01171ea0 01171f90

01f71cf0 01f71d00 01f71e00 01f71f40

02071cf0 02071d00 02071e00 02071f40

00a71cf0 00a71d00 00a71e00 00a71f40



Layout 28

01171c00 01171d01 01171ea3 01171f99

00c71c10 00c71d10 00c71e81 00c71f01

00d71c20 00d71d01 00d71e13 00d71f99

00b71c30 00b71d10 00b71e21 00b71f01

01470c02

？？？？？？
View attachment 307048View attachment 307001View attachment 307002

You should probably use the techniques in my guide:
https://www.tonymacx86.com/threads/...book-zbook-using-clover-uefi-hotpatch.232948/

The only thing different about your laptop is the graphics settings will need to be different.
Other than that, same ACPI hotpatch, audio setup, etc can be used.

 

[hongchangwei]

You should probably use the techniques in my guide:
https://www.tonymacx86.com/threads/...book-zbook-using-clover-uefi-hotpatch.232948/


Thank you for guidance
The only thing different about your laptop is the graphics settings will need to be different.
Other than that, same ACPI hotpatch, audio setup, etc can be used.

In the morning, reinstalled the drive again, and everything was basically perfect, only to notice 2 places

 

[RehabMan]

In the morning, reinstalled the drive again, and everything was basically perfect, only to notice 2 places
View attachment 307253

Yes, IntelBacklight.kext, as one might expect from the name, is specific to Intel graphics and should not be installed on a system without Intel graphics.

 

[Gnesis]

OXS10.11.6

Have you tried 10.13? Can this guide still work?

 

[RehabMan]

Have you tried 10.13? Can this guide still work?

Your profile has no hardware details.
Please fix as per FAQ:
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

 

[PhamTuanAnh]

You can use my EFI file. It working on macOS 10.13.x. But it has a problem with the baterry, which i still can not fix.

What is your wifi card and what is your exact mac version?

 

[PhamTuanAnh]

You can use my EFI file. It working on macOS 10.13.x. But it has a problem with the baterry, which i still can not fix.

Almost worked except brightness control, battery and webcam.

 

[PhamTuanAnh]

You should probably use the techniques in my guide:
https://www.tonymacx86.com/threads/...book-zbook-using-clover-uefi-hotpatch.232948/

The only thing different about your laptop is the graphics settings will need to be different.
Other than that, same ACPI hotpatch, audio setup, etc can be used.

But where can I get config.plist file for dedicated graphic card?