Contribute
Register

[Guide] Dell Inspiron 3x37 - 5x37 -7x37 Clover, Yosemite/El Capitan

Status
Not open for further replies.
bloodstream said:
hi guys I successfully installed 10.11.6, but I found one thing that I cannot really figure it out what exactly make the problem. it is shutting down issue. I am on dell core i3 intelHD 4400. Before I installed El capitan. I was on Yosemite 10.10.5. it worked perfectly fine. Now after I have installed Os X El capitan, I cannot shut my laptop down after 3 hours. even though I put the patches in config.plist but it didn't help. Not just only kextstopatches, but also kexts like voodoops2controller, and all Fakes that were installed to S/L/E. it still cannot shut down. I have searched for more info and i found http://www.tonymacx86.com/threads/big-list-of-solutions-for-el-capitan-install-problems.173991/.

NO! all patches and dsdt, ssdt i patched didn't fixed the problem.
Click to expand...

Is your USB configured correctly?

http://www.tonymacx86.com/threads/guide-10-11-usb-changes-and-solutions.173616/

Plan on a custom SSDT for USBInjectAll.kext matching your USB configuration.
 
RehabMan said:
Is your USB configured correctly?

http://www.tonymacx86.com/threads/guide-10-11-usb-changes-and-solutions.173616/

Plan on a custom SSDT for USBInjectAll.kext matching your USB configuration.
Click to expand...


AFTER run
sudo touch /System/Library/Extensions && sudo kextcache -u /

Result

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Trackpad.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Mouse.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Keyboard.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Controller.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooHDA.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext USBInjectAll.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_XHCIMux.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Intel_HDMI_Audio.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Intel_HD_Graphics.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Broadcom_WiFi.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext BrcmPatchRAM2.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext BrcmFirmwareRepo.kext
kext file:///System/Library/Extensions/AppleHDADisabler.kext/ is in hash exception list, allowing to load


I am not really sure about USB. I did installed usbinjectall also. here are my ssdt,dsdt and ioreg.
 

Attachments

  • MacBook Air.ioreg
    10.1 MB · Views: 81
  • DSDT.aml
    66.2 KB · Views: 104
  • SSDT.aml
    14.6 KB · Views: 118
Last edited:
Im having problems with OsxAptioFixDrv-64, it says it cannot allocate memory. Should i use OsxAptioFix2Drv-64 instead?
 
Hello .. After I complete the steps and everything was ok, it starts as I had chosen (vebrose mode) and then it starts correctly with the apple logo. How to fix this ? my config file no -v only kext-dev-mode=1. but after the crash the detail i found this
BSD process name corresponding to current thread: kernel_task
Boot args: kext-dev-mode=1 slide=0 -v rootless=0
Mac OS version:
15C50
how to remove ( -v ) ..
 
Last edited:
bloodstream said:
AFTER run
sudo touch /System/Library/Extensions && sudo kextcache -u /

Result

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Trackpad.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Mouse.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Keyboard.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Controller.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooHDA.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext USBInjectAll.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_XHCIMux.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Intel_HDMI_Audio.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Intel_HD_Graphics.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Broadcom_WiFi.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext BrcmPatchRAM2.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext BrcmFirmwareRepo.kext
kext file:///System/Library/Extensions/AppleHDADisabler.kext/ is in hash exception list, allowing to load


I am not really sure about USB. I did installed usbinjectall also. here are my ssdt,dsdt and ioreg.
Click to expand...

You need to create a custom SSDT for USBInjectAll such that only ports you need are injected.
 
PlayMa256 said:
Im having problems with OsxAptioFixDrv-64, it says it cannot allocate memory. Should i use OsxAptioFix2Drv-64 instead?
Click to expand...

Make sure CsrActiveConfig=0x67 in config.plist/RtVariables.
 
kvasil said:
Hello .. After I complete the steps and everything was ok, it starts as I had chosen (vebrose mode) and then it starts correctly with the apple logo. How to fix this ? my config file no -v only kext-dev-mode=1. but after the crash the detail i found this
BSD process name corresponding to current thread: kernel_task
Boot args: kext-dev-mode=1 slide=0 -v rootless=0
Mac OS version:
15C50
how to remove ( -v ) ..
Click to expand...

Boot verbose, show photo. Attach EFI/Clover folder as ZIP (omit 'themes' folder).
 
this all file photo verbose and clover
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top