GA-Z77X-UD5H - Unknown Error after Install+DSDT - Can't boot

[thomson002]

Hello duuudes!

If just got my new hardware:

Gigabyte GA-Z77X-UD5H
Core i7 3770K
HDSA 3000GB WD Green WD30EZRX Intellipower 64MB 3.5" (8.9cm) SATA 6Gb/s

Installing + first boot via USB worked fine. All i read was that i don't really have to use DSDT w/ MultiBeast so I've just checked the audio, network and DSDT-free installation.

After reboot I had the boot0 Error. So everything scratch again - plus fixing.

Now with the boot screen (grey apple) it somehow stops and that screen appears (Photo in the attachement).

Anyone any idea what the problem is???

I tried it in safe mode aswell -> Second photo

(btw. my usb installer must be a ML 10.8.2 Version due to Mac OS version 12c60)


Thanks already

 

[potemkin]

Green drives have been a problem in past for some people. I used a few and they worked OK.
Hard to tell from screen exactly what happened.
Try without video card and use onboard video.
Also do search on video card on forum. It might need some tweaks.
Capri reference in boot is to frame buffer for video. (your screen shot)
The other screen shot may have a reference to power management.
I can not read it as restart message is in the way.
The power management may be connected with card.
I usually use just Easy Beast. (less problems)

 

[totenkopf4]

Hello duuudes!

If just got my new hardware:

Gigabyte GA-Z77X-UD5H
Core i7 3770K
HDSA 3000GB WD Green WD30EZRX Intellipower 64MB 3.5" (8.9cm) SATA 6Gb/s

Installing + first boot via USB worked fine. All i read was that i don't really have to use DSDT w/ MultiBeast so I've just checked the audio, network and DSDT-free installation.

After reboot I had the boot0 Error. So everything scratch again - plus fixing.

Now with the boot screen (grey apple) it somehow stops and that screen appears (Photo in the attachement).

Anyone any idea what the problem is???

I tried it in safe mode aswell -> Second photo

(btw. my usb installer must be a ML 10.8.2 Version due to Mac OS version 12c60)


Thanks already

thomson002

Are you able to get to the Disk Install program and how many partitions do you have on this 3TB HD - which is advanced format.
If you can try to partition it into more than 2 partitions so that your install partition is smaller than 1TB

You do have the BIOS configured by the TonyMac guide for Gigabyte Z77 UEFI settings.

Also your video ram is set to only 64 megs.

And you are using the command switches "-v -PCIRootUID=0"
if you have issues you may want to set the cpus=1 so that only one core is used.