GA z77 DS3H Issue

[Retromak]

Hi all, I recently got my brand-new Hackintosh build, and I have some problems :S

Specs:

Motherboard: GA z77 DS3H (BIOS Version F9)
Processor: Inel Core i5 3750K Overclocked
GFX: Gigabyte Nvidia GTX 650 Ti (2GB VRAM)
Storage 1TB WD and 240GB Kingston SSD
RAM: 16 GB Kingston DDR3 BLU (2 slots of 8GB)

The problem is that when I boot with Unibeast (Mountain Lion) It pops up a kernel panic (You need to turn off your machine...)

The Motherboard is set to AHCI mode, the graphics are disabled... I've tried it all, and it won't work

Please, Help me, thanks in advance

 

[mustang80]

Hi, could you please give a full rundown of your specs? I have almost exactly the same setup as you and my install was flawless.

Is your board rev 1.0 or 1.1?

Exactly which multibeast settings did you use?

are you installing with onboard HD4000 first? If so, leave the graphics set to internal for now.

This shouldn't be hard to fix at all

 

[jammer1]

Hello,

I am having an issue using the same mobo. rev. 1.1

I can install ML on the drive but i cant boot it unless im in safe mode.

Is there an issue with that revision or is there something else i might be doing wrong?

Any insight would be greatly appreciated.

 

[stehor]

super simple build if using nvida gfx add flag GE=NO for 6xx or 7xx if using hd4000 use example GraphicsMode=1600x900x32 for your max res and and use correct smbios MacMini6,1 for i5 ivy or 6,2 for i7 also use dvi/hdmi digital only for hd4000