GA-Z68XP-UD3 F10 Successfully Install ML

[kurosagi]

Hey all..

Finally I success install ML to mobo GA-Z68XP-UD3 . Here is my friend specs : CPU ( Xeon E1230 @ 3.30 Ghz , Mobo ( GA-Z68XP-UD3 F10 ) , GPU ( Sapphire HD6870 1GB ) , Ram ( Corsair DDR3 4GB x 2 ). Below is step by step how I install to my friend.

- USB ML using unibeast 1.5.0 ML , after complete I delete ATI6000Controller.Kext and put DSDT on Extra folder.
- Boot USB ML using ( -v GraphicsEnabler=No )
- Complete install ML , reboot then boot using ( -v GraphicsEnabler=No )
- Login to ML >> paste ATI6000Controller.Kext to ML desktop then install with KextBeast .
- Run Multibeast 4.6.1 and tick userDSDT's (DSDT paste to ML desktop) , System Utilities - Repair Permissions , Sound – Patched AppleHDA 889 , Network – RealTek Gigabit Ethenet 2.0 then install and reboot .
- After reboot boot with ( -v -f )
- Now ML working fine but I do something else because when reboot I need put ( -f )
- I download Chimera 1.11.0 and install
- Go to Extra folder / org.Chameleon.Boot.plist and set ( UseKernelCache=No ) save and reboot.
- Done ( ML successfully install )

 

[tamorgen]

Did you get any errors using Multibeast? I cannot get mine to boot outside of safe mode.

What Bios version do you have?

 

[kurosagi]

Did you get any errors using Multibeast? I cannot get mine to boot outside of safe mode.

What Bios version do you have?

Hi,

I use F10..after install multibeast 4.6.1 I boot with ( -v -f ) then install Chimera 1.11.0 and go to Extra folder / org.Chameleon.Boot.plist and set ( UseKernelCache=No ) save and reboot.

 

[legitimateactivities]

I have the same card as you, and I have the same kernel panic.
I had a friend with a mac make my mountain lion thumbdrive.

I have no hope of using your fix if I don't have access to a mac right?