- Joined
- Jul 31, 2015
- Messages
- 39
- Motherboard
- Asus H81T
- CPU
- i5-4440S
- Graphics
- HD4600(cpu)
- Mac
- Classic Mac
- Mobile Phone
Hello, i just managed to hack my new computer and it works great, and i am trying to "install" DSDT SSDT..
It is very difficult to know what is DSDT and DDST ... Why patching, and what to do for a computer ...
so, I followed that guide to "install" that :
But i am stuck on the step 9, i mean, what should i do ?? I have my dsl files, i can openned them with MaciASL and so .. lots of patch available on the website, lot of information, i am comppletely lost ...
I also checked this guide :
[Guide] Patching LAPTOP DSDT/SSDTs
And it says that we have to Filter ACPI files, fixing erros and use a patch? But why patching ?
I am trying to understand, but very not clear on internet to understand. Everywhere it say that we must patch or whatever, but nowhere it says why ....
Does someone can clearly explain what is important and what is not..?
Thanks a lot
It is very difficult to know what is DSDT and DDST ... Why patching, and what to do for a computer ...
so, I followed that guide to "install" that :
DSDT/SSDTs will be different for different BIOS versions/CPUs.
You can extract the ACPI files from your BIOS. Then you can apply required patches and you can use it.
Boot into Linux (No need to install, just make bootable USB of Ubuntu then boot in to it)
Once it is reached desktop open the Terminal and run below command.
Code:
Code:[/COLOR][COLOR=#000000]sudo cp -R /sys/firmware/acpi/tables DEST[/COLOR][COLOR=#000000]
* Replace DEST with the path of your USB Stick (USB Stick need to be formatted as FAT32 for avoiding the permission issues)
Before trying to open, it should be disassembled with iasl
1. Download iasl from here
2. Copy the download iasl binary to /usr/bin/
3. Copy the DSDT and all SSDTS (Copy from Dynamic folder too) to one new folder.
4. Add the extension .aml to all the copied files
5. Open terminal, change the directory to the created new folder (Where you put DSDT/SSDTs)
6. Run the command Code:
Code:iasl -da -dl *.aml
7. Download MaciASL from here
8. Copy the MaciASL to /Applications folder
9. Now you can open your DSDT/SSDTs with MaciASL and can apply required patches.
10. Here is the link for PJALM's desktop patch repo : http://www.pjalm.com/forums/
But i am stuck on the step 9, i mean, what should i do ?? I have my dsl files, i can openned them with MaciASL and so .. lots of patch available on the website, lot of information, i am comppletely lost ...
I also checked this guide :
[Guide] Patching LAPTOP DSDT/SSDTs
And it says that we have to Filter ACPI files, fixing erros and use a patch? But why patching ?
I am trying to understand, but very not clear on internet to understand. Everywhere it say that we must patch or whatever, but nowhere it says why ....
Does someone can clearly explain what is important and what is not..?
Thanks a lot