DDR3 memory shows as just "RAM"

[igorken]

* specs, kexts, screenshot, etc. are included *

Installed Lion using tonymacs guide, everything is working perfectly, except for 1 minor problem: my memory shows as RAM instead of DDR3.

• If both modules are installed, one is detected as DDR3 with manufacturer and etc, but the second one is just RAM with "unknown" manufacturer, part and serial number.
  If I have one module installed, it's just RAM with unknowns.
  Changing modules and sockets didn't help at all, same sh

Didn't have this problem with SnowLeo. How to fix that?

Thanks in advance for any help!

Screen Shot 2011-07-22 at 10.05.03 PM.jpg

Specs:
CPU i7 2600k
MB Gigabyte Z68X-UD3P-B3 (F5)
Mem Corsair Vengeance ( CMZ8GX3M2A1600C9B clickable)
GPU: Gigabyte 6870 GV-R687OC-1GD

Got DSDT.

e/e

ACPIMonitor
ALC8xxHDA
FakeSMC
IntelCPUMonitor
IOAHCIBlockStorageInjector
NullCPUPowerManagement
RadeonMonitor
SuperIOFamily

boot

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>Kernel</key>
	<string>mach_kernel</string>
	<key>Kernel Flags</key>
	<string></string>
	<key>GraphicsEnabler</key>
	<string>Yes</string>
	<key>Timeout</key>
	<string>2</string>
	<key>Legacy Logo</key>
	<string>Yes</string>
	<key>EthernetBuiltIn</key>
	<string>Yes</string>
</dict>
</plist>

smbios

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>SMfamily</key>
	<string>Mac Pro</string>
	<key>SMproductname</key>
	<string>MacPro3,1</string>
	<key>SMboardproduct</key>
	<string>Mac-F42C88C8</string>
	<key>SMserial</key>
	<string>G88451235J4</string>
	<key>SMbiosversion</key>
	<string>MultiBeast.tonymacx86.com</string>
</dict>
</plist>

 

[pympster]

unrelated I know but, did you get your mini display ports working with lion?Thanks

 

[tom.humphrey]

Probably un-related but if it's dual channel shouldn't your memory be in slots 1 and 3 and not 0 and 1 on your motherboard?

 

[mtx]

My system does this in Snow Leopard and Lion.

 

[kaabob]

Happens to my in both Snow Leopard in Lion also.


Try adding these to your smbios.plist
Save and Reboot.
http://prasys.info/2009/09/guidecreatin ... ios-plist/

 <key>SMmemtype</key>
 <string>24</string>
 <key>SMmemspeed</key>
 <string>1600</string>

Remember, these edits are purely cosmetic.

 

[Haxx187]

I had similar issues until i changed a couple settings in bios from auto to enabled.

Tried what Kaabob said prior to that and worked fine as well

 

[tasc]

I have the exact same issue with the RAM under Lion. Speed and size still come out fine, it's everything else that is incorrect or missing.