ASUS Z77 Need Help, just patched bios and installed ML 1.8.2

[newlife229]

Hey guys!!
I just managed with the help of some guru forum like toleda and coderush to patch my own bios for ASUS p8Z77-v LX2

Now i maked a fresh install with -x because of some boot problem normally.
Need help with that passage. I used multibeast to put:
system definition 12,1,
realtek audio 887 driver,
lan driver
easybeast install

I post my -v boot screen!
Thank you in advance !!!

 

[Going Bald]

Hey guys!!
I just managed with the help of some guru forum like toleda and coderush to patch my own bios for ASUS p8Z77-v LX2

Now i maked a fresh install with -x because of some boot problem normally.
Need help with that passage. I used multibeast to put:
system definition 12,1,
realtek audio 887 driver,
lan driver
easybeast install

If you patched the BIOS, do not use EasyBeast - it installs NullCPU and you don't need it. Start over and try with UserDSDT / DSDT free + 887 no dsdt + lan driver.

 

[newlife229]

Thank you for the answer!
I'm trying now your tip!

Have some tip for the boot too??
I tried everything

PCIRootUID=0 /1
-f
-F
GraphipcsEnabler=No/Yes

Nothing seems working.....

 

[totenkopf4]

Thank you for the answer!
I'm trying now your tip!

Have some tip for the boot too??
I tried everything

PCIRootUID=0 /1
-f
-F
GraphipcsEnabler=No/Yes

Nothing seems working.....

newlife

I would do a fresh install again and whipe the HD partition and install fressh - and use the info that Going Bald has posted.

You should only need to use the startup commands '-v PCIRootUID=0" at startup

Follow the info that GB presented in the earlier post.
Take pics and post back.

 

[newlife229]

Ok i've used the multibeast's option has Going Bald said:

booting with -v PCIRootUID=0

This is my result now...



It won't start!

 

[totenkopf4]

Ok i've used the multibeast's option has Going Bald said:

booting with -v PCIRootUID=0

This is my result now...

View attachment 45875

It won't start!

newlife229


After running MultiBeast and makeing the selections that G.B has stated - and before re-boot - did you use the Disk Utilities and Run Permissions Check on the boot volume.

Then Re-boot

Also you may want to use this command line "-v -f PCIRootUID=0" when u re-boot!

 

[newlife229]

now it booted up!

But i reboot and stuck on the same error before.

And after 15 min i booted and i started with -v PCIRootUID=0

 

[newlife229]

It booted properly only 2 time with -v PCIRootUID=0

It won't boot Today! Stucked another time at: this is an unknow cpu model 0x03

Just navigator a bit With safari and player a track with iTunes and magic, it won't boot anymore