Asus Maximus IV Extreme Z

[kigger012]

Post updated! Hope it helps.

Nice write up NIGos~~ thanks~!!
does ur system report, serial-ATA has same issue that im having?? look at the pixs.
or if you fix this issue that im facing, how did you do it? thanks

 

[Squk]

Hi, people =)

One Question: For the installation, which flags(beyond the -v npci=0x2000) should be set? I have a usb stick with 10.7.2 Unibeast. Because i'm blocked in Still waiting for root device. My HD are in AHCI from Bios.

Thanks so much for any reaply

 

[NIGos]

Post updated! Hope it helps.

Nice write up NIGos~~ thanks~!!
does ur system report, serial-ATA has same issue that im having?? look at the pixs.
or if you fix this issue that im facing, how did you do it? thanks

Sry for being so late XD! Anyway no... on my rig the Serial Ata chipset is recognized as "Intel 6 Series Chipset". Mind that I've disabled in the bios every other SATA controller as I don't need em.
If you are using those then more kext may be needed!

 

[NIGos]

Hi, people =)

One Question: For the installation, which flags(beyond the -v npci=0x2000) should be set? I have a usb stick with 10.7.2 Unibeast. Because i'm blocked in Still waiting for root device. My HD are in AHCI from Bios.

Thanks so much for any reaply

Read PM!

 

[zzsage]

I'm having a strange boot loop, any advice would be helpful.

I was able to install, but now it will not boot into osx. I have tried boot with various flag settings.
-v -f -s -x
and all combinations

it just shows initial boot information about 20 lines then reboots.

I have also tried using GraphicsEnabler=No / Yes (though these cards should naitivly be supported)

Specs:
Asus Maximus IV Extreme Z
16 GB 1333 Ram
128 Intel SSD
2x XFX 6870 2 GB
i7 2700k

bios 3304 modified.