Asrock Z270 Gaming-ITX/ac P2.30, Not Detecting USB Installer

[revlimiter]

Trying to install Mojave from latest version of Unibeast, have tried UEFI boot and Legacy boot but to no avail, both in BIOS settings and in Unibeast settings before copying Mojave installer. I press F11 to select the USB drive and it just keeps saying "Reboot and Select proper Boot device or Isnert Boot Media in selected Boot device and press a key". I've tried multiple USB ports. Any ideas how to get the installer running?

Thanks

 

[Namok88]

Use a USB 2.0 (not blue) port, it's slower but will properly initialize when the USB ports will get enumerated.

 

[revlimiter]

There are only blue USB ports on my PC. (Asrock Z270 Gaming-ITX/ac) Therefor, am I not able to install Hackintosh?

 

[Namok88]

Try again with disabling Legacy USB Support and enabling XHCI Hand-off in the BIOS.

Your motherboard also has a built-in USB 2.0 Header (Supports 2 USB 2.0 ports)

Try to connect it to your case's front USB ports and boot your USB Installer from it.

Or simply try to find someone with the same motherboard and is using a custom SSDT to fix the USB 3 ports that you'll have to put in the /EFI/CLOVER/ACPI/Patched/