- Joined
- Dec 30, 2015
- Messages
- 83
- Motherboard
- Asus z97 Sabertooth Mark II
- CPU
- i7-4790k
- Graphics
- ASUS ROG STRIX 480x 8GB
IT WORKED!!!!!
so heres what I did, booted with internal graphics and I downloaded an asus driver for their version of the 280x. I changed the name of that .rom to be [vendornumber]_[deviceid].rom. So it was the xfx vendor number and then my particular device ID. I used clover configurator to mount my EFI partition and added that .rom file to EFI/CLOVER/ROM. Then in clover I had it inject ATI and I selected Load VBIOS. I rebooted went into my motherboards bios and changed it from internal graphics to PCIE graphics and rebooted! Sure enough it worked! Thanks so much for all your help guys!
so heres what I did, booted with internal graphics and I downloaded an asus driver for their version of the 280x. I changed the name of that .rom to be [vendornumber]_[deviceid].rom. So it was the xfx vendor number and then my particular device ID. I used clover configurator to mount my EFI partition and added that .rom file to EFI/CLOVER/ROM. Then in clover I had it inject ATI and I selected Load VBIOS. I rebooted went into my motherboards bios and changed it from internal graphics to PCIE graphics and rebooted! Sure enough it worked! Thanks so much for all your help guys!