ram

Hello, I upgraded my RAM capacity to 64GB with the following modules [Corsair Vengeance LPX DDR4 3200MHz PC4-25600 64GB (2x32GB) CL16]. Right after plugging them, I fell into a boot loop which I managed to solve by changing the SMBIOS Clover configuration so that the OS identifies the 2x32GB as...

Is it better to have some extra headroom on the RAM speed compared to the intended RAM speed which is 2666 MHz to ensure that RAM is going to run at 2666 MHz without overclocking ? or just use a 2666 MHz RAM according to my CPU intel core i5 10400 supported speed, this CPU supports to maximum...

My CPU is intel i3-10100 supports up to 2666MHz RAM , what is the best brand and type of the RAM shows best compatibility with hackintosh builds according to my CPU specification , I don't intend to upgrade my CPU or make RAM overclock , 2666 MHz is just fine for me .

Woke up to Catalina hackintosh not starting or posting. Troubleshooted PSU, motherboard battery, and AIO cooler before determining that one of the 8GB RAM sticks was dead. Removed it and machine posts. Get to OpenCore bootloader and see my OSX Catalina drive, Windows Drive, EFI, and clone drive...

Hello everybody, I build my MacPro three years ago and it works flawlessly since then. Here are the specs of it: Motherboard: Gigabyte Z390 Aorus Pro Wifi v1.0 CPU: Intel Core i9-9900K 3.6 GHz CPU Cooler: Cooler Master Hyper 212 Evo (15.90 cm) RAM: 2x16GB Corsair Vengeance LPX (DDR4-3000, DIMM...

UPDATE: Just leaving this out there for others with a similar problem... I kept changing my EFI to accommodate the larger RAM modules, but what I failed to notice is that by updating the BIOS, my boot drive (NVMe) had disappeared as a boot option and Clover was booted from my clone drive...

Hey, has anyone got 128gb of ram working on a i9 9900K Designare build? Im planning my next build based about the 19 9900K, Z390 Designare and 128gb Corsair Vengeance LPX 2666Mhz DDR4 for animation and premiere pro work. I've seen a couple of posts about creating virtual ram slots in clover to...

Hello friends. Some months ago I am in Catalina 10.15 osx, everything flows perfect, I used the "Catalina Vanilla" method and everything is fine, I changed graphics to AMD with a Radeon VII because before I used "Nvidia GTX 980 ti" because since Mojave there is no Drive support update by Nvidia...

Hi, Long time hackintosh user but a noob at best so apologies in advance if this has been answered because I haven't been able to find anything that solves the problem below. The closest I could find is (https://www.tonymacx86.com/threads/diagnosing-random-shutdowns.256451/) My hackintosh...

Mainboard: Fujitsu D3099-B1 CPU: Intel Xeon E5-2420 v2 Graphics Card: Sapphire RX 580 8GB RAM: 32GB DDR3 1TB Toshiba HDD

Hello 
 I run a Hackintosh with El Capitan since 2015 without a problem. I decided to upgrade to Mojave 10.14.5, following this guide: https://www.tonymacx86.com/threads/z170x-ud5-th-high-sierra-tips-and-tricks.264351/ 
 I started with a fresh install. I changed my GPU for a RX 480 (i had a...

I got a Hackintosh I use for music production. Gigabyte z370 Gaming 7 I7 8700k 64 GB RAM Sapphire Vega 64 I can't get through mixing a song or working on a song without my computer randomly crashing. I already tried replacing the RAM and it did nothing. Here's a crash report : Anonymous...

Hi all I check on Intel site the specs of procs, Intel Core i5-8600K Processor, that reads: “Memory Types DDR4-2666”. Does that mean the RAM has to be 2666 MT/s? I have legacy DDR4 2133 MT/s sticks so are they going to be incompatible? TIA Nick

I installed Mojave a few weeks ago on my laptop (dual boot with sierra) . Felt it was running a bit slower than sierra. Navigation through the system and animations were all smooth. But opening apps and switching between them felt slower. Like Chrome usually took around 12-20 sec to show up a...

hey guys , I had a sierra 10.12.3 working pretty good and i updated to 10.12.6 and i got a kernel panic (img attached) but when i remove one 4gb ram , it works, i tried to put other rams and kernel panic keeps, i can boot only with 4gb, and if i boot using usb i can use 8gb. What i have to do ?

My past Hackintoshes have been X99 machines, using KGP's excellent X99 guides. This new box was much simpler, but now I find myself having to deal with stuff like SSDTs and such, and I'm a little at sea. Here's a quick summary of the machine: - i7-8700k, stock speeds - Asus PRIME Z370-A...

Hi everyone, I'm in the process of purchasing parts for my Hackintosh and I noticed that I only saw Crucial brand RAM under the parts list. I was wondering, has anyone successfully tested other brands or am I limited with Crucial RAM only?

So I have this weird problem where my USB drives are getting eject when my Hack gets waked from sleep. It only happens when XMP profile is set to 1 in my Gigabyte bios. Clover has XMP set to auto detect. System: i7-8700-K Gigabyte Aorus ultimate gaming 16GB Corsair Vengeance memory DDR4...

I saw something on ****** how you could fix the only 8gb memory read. I applied the fix and now high sierra wont boot. Z370-f 16gb corsair dominator platinum gtx 1080 i5 8600k

Hellow everyone. Im new to mac-Hackintosh and i have seen many videow that thanks to YOU ALL (Hackintosh instructions, tutorials, step-by-step how to guides) have made it sucsess to build hackintosh machines. Some of the components i have seen that work (cpu, Motherboard) but i dont know about...