power management

I'm facing some problems after 10.12.6 update: Laptop never wakes from sleep, instead it reboots. Power Management never goes below 3Ghz in "Intel Power Gadget" What I tried: - Almost any flag in Clover's ACPI section - Patching DSDT / SSDTs in Maciasl and via Clover Hotpatch - ssdtPRGen.sh...

Hey guys, I am very new to building computers and this is my first Hackintosh. I am posting because of a kernel panic error about Intel CPU Power managment. I followed the installation process of Unibeast and Multibeast to my USB, and set my computer to verbose mode and tried to boot macOS, but...

I have Dell LATITUDE E6410, Specs: -CPU: Intel Core i5 M520 2.4GHz -RAM: 4 GB DDR3 -Display adapter: NVIDIA NVS 3100M -USB: Intel 5 Series/3400 Series Chipset Family USB Enhanced Host Controller My Laptop gets hotter than normal (Windows) in Sierra. I am using MacBookPro8,1 definition in SMBIOS

I just wonder is this speed step scale is normal with skylake processor (mine is i7 6700hq) and does normal cpu's temp around 54 cel is normal too? P/s: i'm currently at 10.12.6 Speedstep scale gen by CPU-S Processor Model: i7-6700HQ TurboBoost State: Enabled Total Number of Frequency...

Hi Guys, Just a quick question. I currently have Sierra installed on my laptop. My clovers set up perfectly. Just want to know when 10.13 is released and I perform a clean install, is it a simple case of just copying my Previous EFI folder to the new install? The reason I am asking is that I...

Hello all, I've recently put together this hackintosh with the help of Stork's amazing Maximus Hero VIII guide. Everything appears to be working, though I have checked the CPU frequency with HWMonitor as well as Intels Power Gadget and they are showing the frequency at a constant 4.2GHz when...

Ok, so this may be a little tricky to explain but here goes:- My specs: H170m-D3H, i5 6600, 16gb, 850 EVO, GTX 970, Sierra 10.12.5, SysDef 17,1 System runs beautifully, clean, smooth and has NEVER crashed! it's a joy to use, however..... If I walk away from my computer and leave for around 10...

⁃ GPU: Gigabyte GeForce GTX 980 ti 6GB WindForce3 ⁃ CPU: Intel Core i7 6700K 4.0 GHz ⁃ RAM: Kingston HyperX Fury 16 GB (2400 MHz) ⁃ PSU: Cooler Master B600 v2 600W ⁃ MOBO: Asus Z170-A ⁃ Cooling: Corsair H105 AIO Liquid Cooler, 2x NZXT 120mm fans Hello everyone. I 've been lately having some...

Greetings! I'd like to know if my SSDT.aml for that processor is working properly. I have no idea how to tell from the graphs, etc. (not been educated as to meaning). I've attached the relevant files. If the SSDT.aml IS working, please feel free to share it (it was created using 14,2 as the...

Hey! My new hack is working OK, however, I do notice CPU temperatures rising pretty fast (45- 55 degrees) when I'm not really doing any heavy stuff. My PWM CPU fans start to spin even when I'm only looking at some 4k footage, let alone edit it. I'm using the i7 6700k aml file that was provided...

Hello, I installed El Capitan 10.11.6 on my Asus Z9 PE-D8 WS / 2X 8cores Xeon E5 2670 v1 (Sandy Bridge). nullpowermanagement is installed. I tested speedstep following that link. It returned two values 12 and 26 that looked correct. I wasn't sure about the only two values then i followed...

Hi Guys, You want better power consumption or easily overclock your cpu? This is the best way to full control over your CPU with insane speed and optimization out of the box on Skylake systems (and maybe Kaby Lake also). What will you need? Only the latest Clover bootloader and Clover...

I've searched the forums and there are a dozen guides, but none of them for my system/processor/OS. Can anyone point me to instructions for how to get power management working on my Indigo Sawtooth? SO much of getting my first hackintosh running was way easier than I expected, but this last...

Hi, Rehabman! I’ve successfully installed macOS Siera on my MSI GE70 2OE laptop, but I have two small issues that still annoy me :) 1. First problem is fast battery drain (about 1,5 hours for full discharge against 3 hours in Windows 10) and slow charging back - about 2 hours to get from 0%...

Hi there! I've just completed my first hackintosh build with the following specs: Mobo: Gigabyte Z170X UD5 TH CPU: Intel i7 6700k CPU Cooler: Corsair H100i v2 Memory: Crucial Ballistix Elite DDR4 running at 2666Mhz with XMP enabled GPU: IGPU (I have a 1080 installed, but currently only...

Hi! I have successfully installed macOS Sierra on my Hackintosh. Here is my current configuration Motherboard: GIGABYTE GA-Z87X-OC rev 1.1 CPU: Intel Core i7-4770K 3.50GHz RAM: 24GB 1600MHz DDR3 GPU: ASUS GeForce GTX 660 2GB SSD: 3 x Samsung 850 EVO 250GB SATA3 (The OS is installed in one of...

Hi, after finally finishing installing Sierra on my new X99 build I came to the problem of working speed stepping. After reading many threads I've built a SSDT for my CPU with the script from PikerAlpha, put it in the Clover ACPI/patched folder and added the necessary -xcpm flag. In addition to...

EDIT: Updated info for 10.13 here. Ok, this is my first shot at a guide, so it might suck. Hopefully it doesn't. But it might. So, this is not a all-encompassing start to finish guide. This assumes you're at the point where you're trying to boot a macOS Sierra thumb drive (or the upgrade...

I have a GA-X79-UP4 board that is really happy with Clover + El Capitan. I have tried the vanilla update as the main post suggests, and I have also tried the USB way. Both seem to kernel panic really early onto booting into the update portion. I have gotten a few different errors, but the main...

When I was in the early stages of post installation, this was not an issue. Somewhere along the lines, whether it was fixing hdmi audio or attempting to fix power management, I may have messed something up. Now, when I shut down or restart through the OS, everything disappears except the dock...