asrock

This was my first build, so i had to install everything from scratch… After breaking up a long time relationship with Windows 7. Build: Mobo: AsRock Z68 Extreme3 Gen3 CPU: Intel i5-2500K Overclock @ 4.5Ghz. CPU Cooler: Corsair H100i GPU: MSI GTX 660 Ti Power Edition 2GB RAM: G.Skill Ripjaws...

My First post :D:D SO! I'm building a hackintosh in about a month and I was researching various components when I came across the Asrock M8 (http://www.asrock.com/nettop/Intel/M8%20Series/index.asp). I was wondering if this system would work with Mac OSX and if not, what would I need to...

Hello, I have just built a PC with an ASRock H87 Pro 4 motherboard and Intel I5 Haswell Processor. I have tried to install Mavericks on the setup using UniBeast, however when you hit enter to boot the installer, the apple screen shows for about half a second, then the system reboots. Please...

Hi guys, I've been building my second hackintosh today inside a G3 iMac case. The build goes well but I can't install Mavericks. I've booted using -v -x -f GraphicsEnabler=Yes/No ncpi=0x3000 IGPEnabler=Yes/No dart=0 and combinations of the above. The boot always hangs at ****...

Current Specs: CPU: i5 3570k (@ 3.4 Ghz) MB: Asrock Z77 Extreme6 GPU: EVGA 650 Ti Boost 2GB SC RAM: Team Vulcan (4x4GB) SSD: Seagate 240GB SSD (ST240HM000) I've had this system running flawlessly for the passed few months on Intel HD4000 graphics. I set up my system using an edited DSDT and...

hit enter and begins to run tries to enter Darwin and then hits a wall at Boot args: bootuuid system: i5 3570k 8gb corsair vengence as-rock extreme 4 z77 hd6950(unplugged for installation) hdd

Hey guys, i finally installed mavericks on my hackintosh, but speedstep doesn't work. I've tried everything (also ssdt) but nothing worked. So i thought to try it with a dsdt. My rig: i5 2500k 12 gb RAM, 1600 asrock z68 extreme 3 gen 3 msi gtx 560 ti Extracted dsdt is attached. Please help...

Everything is working just fine so far on Mavericks except for the audio. I boot up from the hdd with no trouble and I can dual boot into Windows 7 as well. Here's my problem: I ran MultiBeast and installed the kext that is for ALC1150, but it made my system have kernel panic errors when I...

Specs are as following: -ASUS GTX660-DC2O-2GD5 GeForce GTX 660 2GB 192-Bit GDDR5 PCI Express 3.0 x16 HDCP Ready SLI Support Video Card -Intel Core i7-3770 Ivy Bridge 3.4GHz (3.9GHz Turbo) LGA 1155 77W Quad-Core Desktop Processor Intel HD Graphics 4000 BX80637I73770 -ASRock Z77...

Hello everyone, I started with this config: Asrock H81M-HDS MOTHERBOARD Intel i3-4130 Haswell Processor 4gb RAM 1600 mhz. ASUS GT610 pcie all Of them into a slim mATX BOX. After several fails :banghead: RehabMan solved my problem with early reboot --->...

Hello. I purchased a new motherboard today and began to embark on my first Hackintosh build. After giving it a crack this afternoon my install failed and i need some help getting it finished. My current hardware is as follows. CPU i7-2600k mobo asrock b75m Pro3-m ram 4x corsair XMS3...

Hello, I've updated the motherboard with the custom bios from http://biosrepo.wordpress.com/asrock/z68/. After that, I've installed mavericks on my SSD. Seems that graphics is working, but i got no sound. I have no idea what to do from here :D. I know I have to run multibeast, but i dont...

Hello there, now since this is my first attempt to set up a Hackintosh I found your community and immeditely got stuck. I guess that's a good thing. So here is what I originaly wanted to buy: I've read your January Guide and the Wiki and found out that the ASRock is not on the list of your...

i`m planning to buy the Asrock Z87 Pro 3 Motherboard , can i use it for a hackintosh ...

Hello there! I'm trying to install Mavericks on: Mobo: Asrock Z87 Extreme 4 CPU: i7 4770 GPU: Sapphire R9 280X VAPOR X After starting the install the apple logo shows itself for about a second (if i type in -v all kexts load fine) and right after that my computer restarts. My BIOS is not yet...

I'll provide as much info as possible. Please read trough and see if there is any chance if you can help me! Asrock Fatal1ty Z87 Killer running UEFI 1.10 with PMPatch i7 4770K no OC GeForce GTX780 Kingston 8GB RAM UC 1333MHz OSX installed on 1TB HDD SATA When I was installing Mavericks with...

Hello, my question is, if i can build a Hackintosh with the ASRock H61DE/S3? My graphic card is a NVIDIA GeForce GTX 560, is that possible to? And the processor is a INTEL i5 3.10GHz Quad Core. About an answer I would be very happy! CU

I have an AsRock h87m pro4 motherboard, and it uses UEFI. I was reading that Asus boards that use UEFI don't need a DSDT patch to be fully compatible. Will this hold true for my motherboard? If not, where/how can I make it so that it is?

Played about with a few builds in the past, but this one has to be the cheapest and easiest. Build time including full OS X 10.9 Mavericks install in under an hour, with everything I have checked so far working! MB: Asrock H67M-GE/HT £34 CPU: Intel Celeron G1620 Dual 2.69GHz £27 GPU: ATi...

Hi. Welcome. I'm a noob to hackintosh. But I figured out how to get Mavericks working on my Asrock Z87 Fatal1ty Killer mobo. This hasn't been documented on this site yet. The problem is my ethernet. Qualcomm E2200 killer. From what I hear from every site, it's not supported. Why is this? Can...