5960x

Hi All, Successfully had a clover install with a 5930k processor but upgraded it to 5960x and now it wont boot. The attached verbose is where it stops, literally at the beginning. Anyone had any experiences with this or have suggestions? As its been awhile i recall i had to do some patching...

Hi all, Has anyone managed to get 10.14 Mojave working with the 5960x and Asus Rampage V Extreme? I have 10.10.5 at the moment and is getting a little outdated. Thanks in advance, Jamie

Hello, I am am having trouble running the installer on my desktop after installing High Sierra on the usb. When I boot up into the USB and run the installer it posts the apple logo and then it shows a no symbol sign or a circle with a line through it. Please help Thank you Specs: i7 extreme...

Was anybody able to make this combination work? It´s working perfect with 10.12.6. But it seems quite hard to make it work with 10.13. If anybody did it, Would you mind to share your EFI? If anybody wants it, I can share my 10.12.6 EFI. Of course I will use my own serial number. Thanks in...

My apologies if this situation has been resolved already by someone, but I was unable to find a direct analog in my searching. I have the hardware above running under Yosemite, but I am now trying to upgrade to Sierra. I have Sierra 10.12.3 installed on a secondary hard drive and I'm booting...

Hello, I'm running on yosemite 10.10.5 with an i7 5960X a GTX 980 Ti and I have very low results with Final Cut Pro X export. Seems that OpenCL is not active on my graphic card. Can someone help me ?

Hello guys, I need help with my rig, I cannot get to run GA-X99-UD5 WIFI with the 5960X on El Capitan, I have been trying so hard the last 4 days. Can please someone help me? I have a Titan X graphics card too. I followed this guide...

Hi to All!! this is my setup: Processor: x99 i7 5960X Motherboard: Gigabyte GA-X99-UD5 Wifi, Rev 1.1, Firmware:F20 Graphics card: GTX 980Ti Memory: 32GB For the past 24 hour I can't get the machine to Boot to Installer!!! I used Unibeast 5.2 with and without the Kernel patched. Copied...

Greetings from Sydney Australia., Hope I'm posting in the correct area. Is there a preferred architecture for multiple gpu's? We're looking to build an "Octane" rig. Have budget for four Titan Z's. And, would like to use o'clocked 8 core cpu, which leads to question - can Hackintosh "take"...

Hi everyone, I thought I should share my success getting my system up and running. Many thanks to those who kindly provided the stepping stones to this process. The critical step that got me past the dreaded PCI Configuration Begin was a kext called 'AppleUSBXHCI.kext' which I have provided...

Hi everyone, as i see these days few people selling 5960x because they can't update to El cap, is there any chance to see this 8-core working on a newer Os than Yosemite ? just wanted to know what you think about it Thib

szokeptr's X99 Build: Asus X99 Deluxe - Intel i7 5960x @ 4.2GHz - 64GB RAM - GTX 970 Components Asus X99 Deluxe/U3.1 http://www.amazon.com/dp/B00TXBP1OW/ Intel i7 5960X http://www.amazon.com/dp/B00MMLXIHM/ Corsair H110i GT http://www.amazon.com/dp/B00SIKYZJ6/ Memory: 2 *...

Hello, I have the following gear: CPU: i7 5960x Mobo: Asus X99 Deluxe USB 3.1 GPU: Gainward GTX 970 I am trying to install OS X 10.10.x on this hardware with absolutely no luck. I tried all the guides I found online none of which helps. I tried UniBeast method, with that I reach PCI...

I am trying to overclock my system: Motherboard: Asus X99 Deluxe U3.1 CPU: Intel Core i7-5960X RAM: Corsair Dominator® Platinum Series 128GB (8 x 16GB) DDR4 DRAM 2800MHz C14 Memory Kit (CMD128GX4M8B2800C14) Video Card: 2x (Dual) Nvidia GTX 980 Ti + SLI bridge Storage1: Intel SSD 750 PCIe...

Following this guide as it's similar to my rig. Thanksrbbunmc Getting stuck every time at pci configuration begin. I did the preparations multiple times to make sure I didn't miss something. But I see some errors: "name" not a kext "kernel-_SYMTAB" not a kext I downloaded Yosemite today, may...

Hello after days of work, i want to install Yosemite on a MSI x99s Gaming 9 ACK with i7 5960X and 980ti. So i follow this guide: http://www.tonymacx86.com/yosemite-desktop-support/151067-5960x-yosemite-install-guide.html I can boot on the installer with this flags: -v -f -x npci=0x2000...

​Hello everyone this is my first post and my first time trying to create a Hackintosh. My build: Motherboard: Asus x99-A Processor: Intel 5960x (8 core 20mb) Graphics Card: MSI GTX 760 2GB and GTX Titan Z Memory: Crucial 64GB DDR4 2133mhz The problem I am having is that I cannot get passed...

Hello All, So I started a build to create a top of the line machine for Davinci Relove as well as operate FCPX and Motion 5 better than my old 2008 Mac Pro 8core 3.0 mgz. I bit of more than I could chew by purchasing the parts they had at the store rather than EXACTLY what others builds here...

I have finally purchased my components for my new audio production rig: Mobo: Asus x99 Deluxe - I have just updated the bios to latest version - 1601 CPU: 5960x Ram: Corsair Vengeance 16 Gb 4x4Gb 2666 Mhz PSU: Corsair Ax1200i Case: Corsair Obsidian 750D CPU cooler: Fractal...

Hi guys, I got trouble with the installation of Yosemite on a x99 platform. Here is my build: GA-X99-UD4 BIOS F12 5960X GIGABYTE GTX970 OC 4GB 16G DDR4 RAM I follow a few guides of installing 10.10, but no luck with all of them. I've spent 3 days getting in the installer, but still...