Contribute
Register

Mini PC AMD Ryzen 7 5700U - Need Installation Help

To make life easier during the second process, i.e. to pin point the WiFi changes in the DSDT-S3.aml table. Make a note of the WiFi devices IOReg Name/Path, as seen in Hackintool on the PCIe tab.

IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/GPP3@2,1/IOPP/PT02@0,2/IOPP/PT28@8/IOPP/WIFI@0.

This is the IOReg Name from my Intel AX200 card, yours might be a whole lot different, but from the example above the important parts are these:

_SB/PCI0/GPP3/PT02/PT28/WiFi.

This is the location in the DSDT.aml I would need to find if I were looking to patch the WiFi device in my system.
 
The DSDT-S3.aml table you provided in the EFI above, did that come from a HP laptop?

It doesn't seem to match with any of the devices or components in your AMD ACEMagician system.

I couldn't find any WiFi related patching that would make the DSDT-S3.aml table any use to your AMD mini PC system.
 
Funnyland said:
I have now read again with Clover. But the translation is damn weird in my language. What do I have to do with it now?
Click to expand...
ideally you want to look at the DSDT not designed for your system and also the ask the person that you got the EFI from to see if they have their original DSDT so you can compare the changes

or ask them what patches were performed on the DSDT they are using

it may just be a case of a simple Find and Rename entry that you may be able to incorporate into your setup
 
Feartech said:
ideally you want to look at the DSDT not designed for your system and also the ask the person that you got the EFI from to see if they have their original DSDT so you can compare the changes

or ask them what patches were performed on the DSDT they are using

it may just be a case of a simple Find and Rename entry that you may be able to incorporate into your setup
Click to expand...
I managed to create a completely new ACPI based on my system following dHawk's instructions. (But it always takes a little longer and the translation is also difficult)

So the old ACPI ballast is deleted and completely remade.
 
Unfortunately it doesn't work with the new ACPI either.WIFI done exactly according to instructions.Even an entry under Device Properties didn't help.Nvram reset after every restart.
 

Attachments

  • EFI.zip
    59.9 MB · Views: 3
Funnyland said:
Unfortunately it doesn't work with the new ACPI either.WIFI done exactly according to instructions.Even an entry under Device Properties didn't help.Nvram reset after every restart.
Click to expand...
shouldn't have anything under DeviceProperties when you use NootedRed
 
Try this EFI.

Just add your Serial Number and SystemUUID to the config.plist don't change anything else.
 

Attachments

  • EFI-3.zip
    60.4 MB · Views: 8
Yes please don’t change anything in the EFI… at all!
 
Feartech said:
shouldn't have anything under DeviceProperties when you use NootedRed
Click to expand...
I realized that when I wrote it and deleted it shortly afterwards. But it didn't help
 
Edhawk said:
Try this EFI.

Just add your Serial Number and SystemUUID to the config.plist don't change anything else.
Click to expand...
Thank you EdHawk,

Wifi doesn't work with it either if it should.
 
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top