- Joined
- Feb 28, 2015
- Messages
- 7
- Motherboard
- GA-H77M-D3H
- CPU
- i5-2500K
- Graphics
- MSI N460GTX Hawk
- Mac
- Classic Mac
- Mobile Phone
Hey everyone,
I have been trying to get HDMI audio to work for a few days, but I wasn't successful so far. I need a little bit of help
Here's my setup:
I'm using the NVIDIA WebDriver 343.02.02f02.
I deactivated the onboard sound card in my BIOS. The onboard card is a VIA VT2021 with 3 ports on the mainboard. I only want to use HDMI audio via my graphics card. I hope that's possible.
Here are my assumptions that I made based on the guides from toleda:
I tried sb3-hdmi_audio_ami_bios_hd3000-3.txt_v2.1 any way, didn't work. That probably shows, that I don't really know what I'm doing I also tried a few other patches. None of them worked:
I didn't apply any changes to my config.plist. I only patched the DSDT.
I'm sure I'm doing something wrong. Please let me know what.
I'm using the attached DSDT right now. I only applied toleda's clean compile patch to the initial MaciASL DSDT. The SSDT I generated using ssdtPRGen.sh.
I have been trying to get HDMI audio to work for a few days, but I wasn't successful so far. I need a little bit of help
Here's my setup:
- Gigabyte GA-H77M-D3H (BIOS F12)
- Intel i5-2500K
- GeForce GTX 460 (MSI N460GTX Hawk)
- Yosemite 10.10.2
- Clover r3185
I'm using the NVIDIA WebDriver 343.02.02f02.
I deactivated the onboard sound card in my BIOS. The onboard card is a VIA VT2021 with 3 ports on the mainboard. I only want to use HDMI audio via my graphics card. I hope that's possible.
Here are my assumptions that I made based on the guides from toleda:
- Because I'm using a H77 chipset with a i5 2500K, I should be using 7series/HD3000/AMD/Nvidia - https://github.com/toleda/audio_hdmi_hd3000.
- Because I don't want to use onboard audio or onboard HDMI, I should be using audio ID 1.
I tried sb3-hdmi_audio_ami_bios_hd3000-3.txt_v2.1 any way, didn't work. That probably shows, that I don't really know what I'm doing I also tried a few other patches. None of them worked:
I didn't apply any changes to my config.plist. I only patched the DSDT.
I'm sure I'm doing something wrong. Please let me know what.
I'm using the attached DSDT right now. I only applied toleda's clean compile patch to the initial MaciASL DSDT. The SSDT I generated using ssdtPRGen.sh.