No Audio Devices - Realtek ALC AppleHDA [Guide]

[StMixk]

Hi !

Before anything, I followed this thread's steps, and disabled SIP from the start. In another install of El Capitan, I had managed to get audio working somehow with the AppleHDA-1150.apk from multibeast Yosemite, but it's not working now. It removes HDEF in the IoRegistry when I install it.

Here's my report :

1. No audio devices found
2. OS X 10.11.5/Gigabyte Z170 K3/BIOS version F1 (ID 8A29AG0X)/i5 6600k/GeForce GTX 980 STRIX OC
3. Multibeast ALC 1150
4. Attached file
5. Attached file
6. System/Library/Extensions/AppleHDA.kext attached
7. System/Library/Extensions/AppleHDA1150.kext attached
8. Console/All Messages/kernel Sound Assertions - select/Save Selection As:
9. Screen shots:
   1. DPCIManager/Status (Tools 1.)
   2. System Information/Hardware/Audio/Intel High Definition Audio (not Devices)
10. Attached
    1. audio_pikeralphaALC-110...command
11. Clover : see attached files

Thank you for your help. Getting audio to work is the last thing I need to have my hackintosh truly set up

 

[toleda]

It removes HDEF

Tried every method, one after the other. If the first method fails, stop. The clue: "Error: no IOReg/HDEF; BIOS/audio/disabled or ACPI problem." ACPI problem.
1. Remove S/L/E/HDAEnabler1.kext
2. See Unsupported/Non working Realtek ALC AppleHDA/Post #1
3. Install AppleHDA audio, one method only.
4. If no audio, reply with new files.

 

[StMixk]

Tried every method, one after the other. If the first method fails, stop. The clue: "Error: no IOReg/HDEF; BIOS/audio/disabled or ACPI problem." ACPI problem.
1. Remove S/L/E/HDAEnabler1.kext
2. See Unsupported/Non working Realtek ALC AppleHDA/Post #1
3. Install AppleHDA audio, one method only.
4. If no audio, reply with new files.

All right, so I've done what you said, and I think I'm getting close to getting the audio working.

1. I have reinstalled the native AppleHDA.kext
2. My realtek 1150 now appears in DPCI Manager
3. HDEF appears in IORegistry with the correct layout-id
4. Now I indeed get the "Error: no IOReg/HDEF; BIOS/audio/disabled or ACPI problem."
5. So I went to your post Realtek ALC AppleHDA [Guide] and I first tried to reinstall ALC with multibeast, which didn't work
6. So I tried method #2 with one of your scripts worked up until the patching where I get the error :

Print: Entry, ":KernelAndKextPatches:KextstoPatch:xxx dict", Does Not Exist
​

Where do I go from here ? I tried looking at this part of my config.plist but didn't see any error? (but then again, I am totally new to this hackintosh deal, so I'm learning everything on the go)
Thank you for your help, toleda.

 

[toleda]

done what you said

Attachments show MultiBeast and cloverALC and pikealphaALC and AppleALC installed.
See Post #1/Uninstall Realtek ALC AppleHDA
One method only, try again.

 

[StMixk]

Attachments show MultiBeast and cloverALC and pikealphaALC and AppleALC installed.
See Post #1/Uninstall Realtek ALC AppleHDA
One method only, try again.

Hey, Toleda

I've uninstalled everything, and right now I've only installed ALC with multibeast.
I think I've figured out what's wrong. All along, the layout-id wasn't the right one (the one I kept checking was for my Graphic Card HDMI audio output), it shows <00 00 00 00>.
So I've tried to edit the layout-id using MaciASL as per your instructions, but whenever I try to compile (even after patching your clean compile), I get syntax errors for several lines :

syntax error, unexpected '}', expecting '('

This is the only thing standing in my way, I think.

 

[toleda]

tried to edit the layout-id using MaciASL

Not necessary, MultiBeast sets Clover Audio ID when installing audio
Screenshots are useless; attach all requested files.

 

[StMixk]

Not necessary, MultiBeast sets Clover Audio ID when installing audio
Screenshots are useless; attach all requested files.

I've re-uninstalled everything, re-installed native AppleHDA.kext, and only installed ALC with MultiBeast, and the layout-id still isn't right.

 

[toleda]

layout-id still isn't right

config.plist/Devices/Audio/inject/1 is correct
Attach EFI/CLOVER/ACPI/Patched/SSDT-HDEF+-1.aml
Cannot use config.plist/ACPI/DSDT/Patches/Rename HDAS to HDEF with SSDT-HDEF....

 

[makproductions06]

1. Did fresh install of el capitan and can't get audio selectors in settings to show up.
2. Hardware: Gigabyte Ga-X58A-UD5 F7 - intel Core i7-970 - Radeon hd 6870
3.Realtek ALC AppleHDA, Post #1.
4.Used command script. uploaded file
5. Uploaded
6.Uploaded
7.Uploaded
9. Uploaded
10. uploaded
12. uploaded

I hope I uploaded everything right.. let me know if i need anything else.

Thanks

 

[toleda]

can't get audio selectors in settings to show up

boot log does not show realtekALC.kext loading and does show:

54:127  0:000      1 Kexts to patch
54:127  0:000       KextPatch[0]: 8 bytes, AppleAHCIPort

config.plist shows 3 patches.
Installed audio to a different EFI partition than the EFI partition booted.
Mount the boot EFI partition and run cloverALC again