No Sound - Realtek ALC AppleHDA [Guide]

[toleda]

Hardware used to check line in is a logitech headset

Pink and green connectors or combination connector?

 

[BlaBla1a]

El Capitan 10.11.5 / Gigabyte GA-Z68MA-D2H-B3 / BIOS Ver. U1C / i7 2600k

Audio not working, It was working only on one boot when I used old ML multibeast 5.5.5 and chose ALC889 after restart it stopped working

I uploaded a picture of the old multibeast choice
In Yosemite+ML this ALC889 worked fine with my computer.


audio_codecdetect.command_v1.6 output

File: audio_codecdetect.command_v1.6

HDMI audio codec(s)
AMD:      0x1002aa01

Onboard audio codec
Realtek: 0x10ec0889

OS X/10.11.5 Onboard Audio
Device: HDEF@1B
Audio ID: 1

Valid audio codec, audio device and Audio ID; audio injection is working
Finished

sudo ./audio_cloverALC-110_v1.0r10.command
Agreement
The audio_cloverALC-110 script is for personal use only. Do not distribute
the patch, any or all of the files or the resulting patched AppleHDA.kext
for any reason without permission. The audio_cloverALC-110 script is
provided as is and without any kind of warranty.
File: audio_cloverALC-110.command_v1.0r10
Release Mode
EFI partition is mounted
System Integrity Protection status: enabled (Custom Configuration).

Configuration:
    Apple Internal: disabled
    Kext Signing: disabled
    Filesystem Protections: disabled
    Debugging Restrictions: enabled
    DTrace Restrictions: enabled
    NVRAM Protections: enabled

This is an unsupported configuration, likely to break in the future and leave your machine in an unknown state.

OK to patch
Confirm Realtek ALC889 (y/n): y
Clover Audio ID Injection (y/n): y
Use Audio ID: 1 (y/n): y

Download ALC889 files ...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 24438  100 24438    0     0  22179      0  0:00:01  0:00:01 --:--:-- 22196
Edit config.plist/Devices/Audio/Inject/1
Edit config.plist/SystemParameters/InjectKexts/YES
Download kext patches
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  1404  100  1404    0     0   1795      0 --:--:-- --:--:-- --:--:--  1795
Print: Entry, ":KernelAndKextPatches:KextsToPatch:4 dict", Does Not Exist
Print: Entry, ":KernelAndKextPatches:KextsToPatch:5 dict", Does Not Exist
Print: Entry, ":KernelAndKextPatches:KextsToPatch:6 dict", Does Not Exist
Print: Entry, ":KernelAndKextPatches:KextsToPatch:7 dict", Does Not Exist
... alot of lines like this

the last script was working before, when I try to run it now inorder to post this log this error happend..

 

[toleda]

I used old ML multibeast 5.5.5

cloverALC requires native AppleHDA.kext, restore.

 

[BlaBla1a]

I did restore, The logs above are after i restored, I just mentioned that multibeast 5.5.5 alc889 kext worked so the problem might be identified faster.

 

[toleda]

I just mentioned that multibeast 5.5.5 alc889 kext worked so the problem might be identified faster.

Not recommended. Installed a useless kext; remove S/L/E/HDAEnabler1.kext.
Restart, attach new files including AppleHDA.kext

 

[starchild2]

individual pink and green connectors

 

[starchild2]

Pink and green connectors or combination connector?

Sorry, see http://www.tonymacx86.com/threads/no-sound-realtek-alc-applehda-guide.143750/page-95#post-1283256 pls

 

[toleda]

pink

Pink plugged into what connector?

 

[starchild2]

Pink plugged into what connector?

You've made me think again about it, and I've tested the rear once more and the mic in is working now. Thanks for helping me through the process.

I've got wifi working now too, so I think this is a GOLDEN build now!

Thanks mate.

 

[infernouk]

Hi there

I am working on getting my audio issue fixed. I use an external audio interface through USB. OSX picks it up fine and sends audio to it.

Issue is, when i open a music production program such as logic, it will change the system audio output to 32000 from 42000 causing static and only left channel sound...

Is this a kext issue?

Regards