Hackintosh Beginner needs help, Thanks.

I have been trying for few hours, but the system could be booted up after multibeast installation.

My setup:
Motherboard: MSI B75MA-P45 (BIO v1.4)
Ram: Corsair Vengeance 4gb x 2 + 8Gb x 2
GPU: Sapphire ATI HD6670 128bit 1gb ddr3
CPU: Intel i5-3470 CPU
SSD: Plextor M5P 128gb ssd
HHD: WD Green 2tb 7200rpm 3.5 hhd

I use this old setup to start my first hackintosh.

For the USB Installation Step,
I Boot with my UniBeast USB
Boot-flag GE=yes PciRootUid=0 -v -x

After the Installation,
I boot again from UniBeast USB and select OSX (My SSD)
Boot-flag GE=yes -v -x

In the multibeast,
I used the DSDT for BIO v1.4 from the link below.
http://www.tonymacx86.com/dsdt/61894-dsdt-msi-b75ma-p45.html

with "GraphicsEnabler=yes"
"RTL887 current"
"USB 3.0 - Universal"
"RTL8111 v123 Ethernet" selected.

and then I removed the USB and reboot.
the video input cut out during the apple start up page.


I have no idea which part of the multibeast installation had gone wrong.

Please give me some suggestion if you can kindly help.
Thank you

Joel

How are you connected to your monitor ?
VGA is not supported - Use a digital connection - DVI or HDMI.

i used the hdmi output

can you still boot if you use GraphicEnabler=No