Help Needed. GA-Z97X UD5H 4790K

Hi , can you send me your BIOS UEFI setting please ,
And your Multibeast setting ,
I have already restart all the installation 2 time , and that is my 3 rd time because my BIOS and Multibeast setting are not good , so the Boot doesn't work , even with -x mode
Please help me I am lost ...
Thanks you for your help and sorry if me english is not very good

I have a slightly different build than you, but I think that it is close enough that it might help. I have the GA-Z97X-UD7TH and here is a link to the build I followed that included all of the info that you need. Give it a whirl, it might work for you.


http://www.tonymacx86.com/user-buil...7x-ud7-th-i7-4790k-32gb-gtx-770-10-9-4-a.html

- In BIOS I started by loading optimized defaults, disabled "VT-d" and virtualization, turned off onboard graphics (I'm using a supported NVidia GTX card) and used that as my starting point. That should be all that is needed to get a working system.

- In Multibeast, in the "quick start" tab I selected "DSDT free," which sets almost all of the options needed for a successful system with this board.

- Selecting the "Realtek ALCxxx -- ALC1150" driver, even with the "optional HDAEnabler" option "Audio ID: 1," does not seem to enable audio on this board. I use a Soundblaster USB audio stick and always have for my hack builds to avoid this issue.

- I selected the Network "Intel -- AppleIntelE100e v2.4.14" option based on info from others here (Intel is the bottom ethernet port on this board). I get hangs when I try to enable the upper ethernet port which is the Atheros Killer Network option.

- Under Customize I changed "System Definitions" to iMac 15,1, you should read around to see which option suites you best but this option did work for me.

- Don't enable the USB 3.0 option, USB 3.0 works fine out of the box and this option caused frequent hangs for me.


GOOD LUCK - Sometimes trial and error is needed, and that's hackintosh for ya.