- Joined
- Jan 31, 2023
- Messages
- 1
- Motherboard
- Motherboard OR System make and model names > See Forum Rules!
- CPU
- Intel > Need full CPU model number > See Forum Rules!
- Graphics
- HD 4000
Running macOS 10.14.6 Mojave
(via the dosdude patch)
on an unsupported MacBookPro 9,2
with Intel HD Graphics 4000
I started up FCPX 10.3.4, I received an error message : Graphics configuration not supported
I've seen some workarounds on this website.
My hope is that someone will point me in the right direction of what I need to.
For example, using a FakeID to spoof the IMEI Number...
See here :
You have HD4000 on 6-series chipset.
Must use a FakeID for the IMEI.
Refer to the laptop guide plists for clues:
- - - - -
Maybe I should backtrack here and include the following :
I had taken a "patched" (via dosdude) hard drive with macOS 10.7
running in an older MBP,
and swapped the aforementioned drive into a MacBookPro9pt2,
thinking that THAT procedure alone would have no issues.
Everything else operates smoothly,
Photoshop, Illustrator, Acrobat etc
I was thinking I wouldn't have to format & install
a fresh HD with a fresh install of Mojave 10.14
Although this ^^^ is an Option unto itself (Option 00 ???)
Option 01 : just migrate/transfer
the info from my aforementioned hard drive (the one from an older MBP)
over to the NEW Mojave Freshly installed HD in the MacBookpro9,2
Does this require an Apple ID?
Option 02 : Keep looking for a workaround, using the drive that is in the MacBookPro9,2
that is running of of a "patched" macOS Mojave.
Option 3 : See if there is an update available for the "patcher" itself. (from dosdude)
Any input would be appreciated.
(via the dosdude patch)
on an unsupported MacBookPro 9,2
with Intel HD Graphics 4000
I started up FCPX 10.3.4, I received an error message : Graphics configuration not supported
I've seen some workarounds on this website.
My hope is that someone will point me in the right direction of what I need to.
For example, using a FakeID to spoof the IMEI Number...
See here :
You have HD4000 on 6-series chipset.
Must use a FakeID for the IMEI.
Refer to the laptop guide plists for clues:
[Guide] Booting the OS X installer on LAPTOPS with Clover
Overview One of the first challenges you'll face in installing OS X to your laptop will involve getting the OS X installer to boot from USB. This guide is for those wishing to use Clover (and in fact the only bootloader supported here). Both installing using Clover UEFI and Clover legacy are...
www.tonymacx86.com
- - - - -
Maybe I should backtrack here and include the following :
I had taken a "patched" (via dosdude) hard drive with macOS 10.7
running in an older MBP,
and swapped the aforementioned drive into a MacBookPro9pt2,
thinking that THAT procedure alone would have no issues.
Everything else operates smoothly,
Photoshop, Illustrator, Acrobat etc
I was thinking I wouldn't have to format & install
a fresh HD with a fresh install of Mojave 10.14
Although this ^^^ is an Option unto itself (Option 00 ???)
Option 01 : just migrate/transfer
the info from my aforementioned hard drive (the one from an older MBP)
over to the NEW Mojave Freshly installed HD in the MacBookpro9,2
Does this require an Apple ID?
Option 02 : Keep looking for a workaround, using the drive that is in the MacBookPro9,2
that is running of of a "patched" macOS Mojave.
Option 3 : See if there is an update available for the "patcher" itself. (from dosdude)
Any input would be appreciated.
Last edited: