Hello team I am facing an issue with the display port on my Rx 580 Every time I start my Hackintosh screen fluctuates. I am sharing the video for the same in the attachment. Please help me to fix the issue if I connect the display cable to another display port on Rx 580 I am not getting the...
I have a 100% working RX 570 (using DP port) Monterey 12.3.1 build based on golden build thanks to CaseySJ - GA Z690 Aero G DDR4 with 12600k and Alpine Ridge TB3 card. Sleep, restart and shutdown works flawlessly thanks to CaseySJ's guide and contributors.
Tried to upgrade to a 6600 XT (Asrock...
Hello - I wonder if anyone can help.
I decided to install hackintosh on my Samsung 530U3C-A01 laptop. All functions are working, but the built-in display does not show the picture.Clover is loaded after that macOS is loaded to half and the picture is thrown to HDMI.Without WhateverGreen, it...
After lots of complications, completed hackintoshing my HP Probook 640 G1 with Mojave. before, I tried with High Sierra too. Everything is ok except, bluetooth, wifi and EXTERNAL DISPLAY. I have tried much , but still failed mostly. I followed Rehabman's guide . I patched DSDT and SSDT. the...
You may need to force RGB mode to your display, if it encounters:
Colour banding
Magenta screen
Blurry texts
Labeled as a TV but actually it is not
Et cetera
macOS may have sent a signal with YCbCr instead of RGB to your display, but yours cannot handle. To solve the problem, follow the steps...
So I have a QHD'ish display on my laptop. (3000x2000). Rehabman's guide states that for the display to work, we need to set the DVMT to 96MB or 128MB. However, my laptop only goes up to 64MB max. Is this a dead end for the screen? Is there any work around? IntelDVMTfixup kext is only for the...
Hello,
It's been a long while since I did a Hackintosh project, but I wanted to convert my XC550A (R510C) from a Windows machine to a full-blown Hackintosh laptop. I was able to successfully install macOS Sierra onto the hard drive and I can boot into the graphical desktop, but I am unable to...
Hey guys. Can anyone help me find out if there is a way to have a dual-monitor setup in High Sierra or Sierra using ONLY THE MoBo (GPU just died) - CPU is Intel 6600K, without hot-plugging and all that fetish.
I've found this...
Seems like I can’t get any answers on my current issue , I’ll explain once again and in full detail.
I have a fully working High Sierra hackintosh on the following specs
Z170A MSi krait gaming x3
I7 6700k
Crucial ballistix 16gb ram 3200
EVGA Gtx 1070 sc hybrid in sli
After attempting all...
Hi guys, I 've finished recently my installation of macOS Sierra on my desktop.
I was able to make the nvidia drivers work, when I say work I mean, the computer detects it and I can select it as default.
But I'm having a problem now, it's the resolution. It's stucked at 1280x1024, and I have...
My problem is that i get screen tearing when i boot up and also graphic bugs or glitches when using the mac.
Another problem is that it also does not read my graphics when it is supposed to say "Intel HD 530 Graphics" but it just says "Display 7 MB"
please help.
here is a video of what is...
When I start up with both of my monitors on it goes to the bootloader perfectly fine, but when I start up the iOS the screen stays black until I turn off the main (right) monitor and turn it back on. Also when I load up my login screen is mostly fuzzy, this fuzzy graphics also happens sometimes...
HI, I'm a bit of a newbie with hack's,
had this build for about 6 years now and have had no problems until now.
Basically, after turning on after a weekend of being away my hack now has a yellow screen. Some parts of the screen are totally normal but other areas are yellow, such as the main...
Hello,
So im new to hackintosh and I fell in love with it after i got a MacBook, i could not get enough of the gui, simplicity and over all beauty of the OS. At the moment im running this machine on win10 with:
All my hardwear is either Gigabyte or Intel. ( I dont have anything with msi or...
Hi!
How do i know, what is my laptop's problem? I have random artifacts, lines, freezes, but i don't know, which problem it have... How to identify that i have EDID, or VRAM error? Here is a video:
https://www.youtube.com/watch?v=jFFd0BPwZ78&feature=youtu.be
I have this with all...
I've have just installed mavericks - all is well except my display.
Specifcation:
Motherboard - GA-B75M-D3H
CPU - Intel i3 3225
RAM - 8Gb Corsair
SSD - Samsung 840 Basic 250Gb
Graphics Card - Asus GT 610
Monitor - Dell U2713H (Connected through DVI)
When I go to change my display...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.