Re: Guide: GA-Z68X-UD3H-B3 with ATI 6870 - Clean Lion Install
Hi Gordo 74
Hav you tried the new UEFI bios U1h (rev 1.0 and rev 1.3)
http://www.gigabyte.eu/products/product ... =3973#bios
Re: Stork's Sandy Bridge Z68X-UD3H - i7-2600K - HD3000 - Lion
Hi Stork
What about the new UEFI bios (U1h)
http://www.gigabyte.eu/products/product ... =3973#bios
Have you tried it ?
Think i´ve got it working using both Drop SSDT and generate p states.
My smbios.plist is Macbook Pro 8.3
I´m running x64 and in HWMonitor i´ve seen x16 - x19 - x22 - x28 - x35 - x38 - x41 and x42
i´ve attached my Extra folder (zipped)
Geekbench score = 15080
I can se that you connected your DVD to one of the two SATA 3 (6 Gigabit) connectors.
Don`t do that use one of the 4 SATA 2 (3 Gigabit) connectors)
And then update your Bios to F4 and use the DSDT.aml from the database.
I have the same MB and everything`s working.
Use Mac Pro 3.1
Just checked
It`s the same here.
No Showallfiles and i also has that Contents folder
Update:
I googled and found this:
http://gotoes.org/sales/ShowHiddenFilesMacOSX/
It has a few more very usefull features
Is your Windows 7 HD the #1 in Harddisk Boot Priority ?
It`s a must both when installing Windows and when making that reg change.
After that you can change the #1 in Harddisk Boot Priority to your OS X HD
and use Chimera loader and boot to Windows instead of using the F12 option.
Re: DSDT Database: Gigabyte Sandy Bridge 1155 AVAILABLE NOW!
Ha ha
Thanks for your great work
I´ve used your autopatcter since GA-EP45-DS3L.
Do you think there`s any chance that what Stradivari is working on here:
viewtopic.php?f=79&t=19543
Could be done to Gigabyte MB`s ?
The eSata controler...
You don`t need to reinstall Windows 7
Just boot to Windows 7 without AHCI in bios.
Unzip and double click on attached file.
Now reboot and enter bios and set it to AHCI.
Voila.
Now you can boot Windows 7
Re: DSDT Database: Gigabyte Sandy Bridge 1155 AVAILABLE NOW!
I think it` a little bit funny to se that danielnmaldonado aka MaldOn only is a GeekInTraining.
Good to se that i`m not the only one having this "problem"
It`s only cosmetic.
The performence is not affected negative by this.
Check it with Geekbench
I did a fresh install and used Multibeast 3.7 with the new Chimera 1.41
But now Processor Interconnect speed is 400 Mhz in SP ?
v.1.40 was correct (5GT/s)
Update:
I think i`ve found a bug.
In Multibeast 3.7 i choose Chimera v1.4.1 r877 as bootloader
but on the preboot screen it says
Boot...
Re: DSDT Database: Gigabyte Sandy Bridge 1155 AVAILABLE NOW!
Thx Tony.
Just tried it on my GA-P67A-UD4-B3 (F4) and it`s working great.
Do you think that there`s a way to get Hot Swap on e-SATA ports working tweaking the DSDT.aml
Stradivari did it on his Asus P8P67 Pro...
Re: Fine Tuning SATA/eSATA on Asus P8P67 Pro
I ordered this
http://eshop.macsales.com/item/NewerTech/MXPCIE6GS2/
That solves the problem.
But i really hope that it can be fixed.
Good luck
Re: Fine Tuning SATA/eSATA on Asus P8P67 Pro
Yes i tried to run that command
sudo setpci -s 08:0.0 40.b=b3 41.b=a1 42.b=c2
(is that correct ?)
But as you can see on attachment notthing happens
Re: Fine Tuning SATA/eSATA on Asus P8P67 Pro
Here it is but it is only cosmetic
Put it in Extra/Extensions
Repair Permissions and Rebuild mkext
I have the same Problems (no hot swap)
We`ll have to wait and se what Stradivari will find out
Re: Fine Tuning SATA/eSATA on Asus P8P67 Pro
Just did that and now it`t correct in SP.
But That`s only cosmetic
eSATA ports still not functioning correct
Thx anyway
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.