Search results

Yep thats was all I did to get it working, maybe check your hardware ID's are in the Plist file inside the driver. I no longer have this motherboard so can't investigate it much further for you. Kind Regards Plasma

Ahh, that might be it then, I've located the Web Drivers and its looking MUCH better. I'm going to do a fresh install get rid of the CUDA drivers and all the other things I tried to get it working! Thanks very much for pointing out my mistake, I didn't realise there were two sets of NVIDA...

@EddyMac yes I did download the CUDA drivers and install them, but they didn't seem to make any difference either. I did a re-install last night and haven't put them on again yet so I'll give that another whirl. I guess I simply install the drivers then set "nvda_drv=1"? Do I need anything...

I am also struggling with this card (EVGA GT 740 4GB SC single slot) after buying it off the supported hardware list I wrongly assumed it would be a breeze to get going. I can't get the machine to boot properly unless I have nv_disable=1 set. :( Tried nvda_drv=1 and ensured inject / graphics...

El Capitan fresh install on an i7 - 4790K 4Ghz (not overclocked) with 32 Gb RAM on a Gigabyte Z97X Gaming 5

After a bit more googling and trial / error I located this a Kext which I placed in the Clover 10.11 Kexts folder, rebooted and hey presto .. 1000baseT working like a charm on my Atheros Killer E2201! I can't figure out how to marked this as [SOLVED] so if a mod could do that for me I'd be...

Atheros Killer Network on Z97X-Gaming 5 Auto Negotiate Just discovered reading the specs its actually a: Qualcomm® Atheros Killer E2201 LAN chip (10/100/1000 Mbit) Is the fact its a E2201 and not an E2200 the problem? As I say it works fine just very, very slowly. Plasma

A fresh install of El Capitan on an Z97X-Gaming 5 motherboard with an Atheros Killer E2200. While the network is working, its only running at 10baseT. Its plugged in to a gigabit switch, any attempt to manually set it to 1000baseT disconnects the network. I have used the latest Multibeast and...

Gigabyte Z97X Gaming 5 and Crucial Ballistix Tactical RAM Speed Magic thanks for the quick response that was easier than I thought it might be. It was set the same as your image so I clicked on the '1' did a save and rebooted. Looks good, just need to read the iMessage guide now! Kind...

Ok so I just built myself a new machine, core components are .. Intel Core i7-4790K, 4 Ghz, 8Mb, LGA1150 Gigabyte Z97X Gaming 5 Crucial Ballistix Tactical 4 x 8Gb 1600Mhz (PC3-12800) Its my first EFI install but its gone very well, managed to get El Capitain installed with no fuss, Graphics...

Thanks for the reply, I was hoping to use the onboard / on CPU - Intel HD 4600 Graphics will this work natively or should I be looking to add a video card as well? I don't need a mad graphics card, just something to get a decent resolution with, I won't be gaming or watching video's on it...

So after almost 7 years of living with dodgy drivers and poor hardware I've decided it's time to build a proper hack. Looked on the HCL and found what I think is a decent board at a price that isn't going to kill me:Gigabyte Z97X-GAMING 5 Intel Socket 1150 With an i7 quad and maxed out with...

I never changed anything in the BIOS and I'm not sure there are any graphical settings in the T410 BIOS anyway. The method I used worked as I have now installed and booted in to Yosemite 10.10.3 after replacing the graphics kext on the standard install too. Plasma

I rebuilt the stick 3 times without adding these drivers and it refuses to boot to the GUI at all. This was my last ditch attempt before giving up completely and it worked. Plasma

I deleted the Yosemite installer app and re-downloaded it from the AppStore. i then did as before, removed ACPI, replaced voodoo, and removed ALL the Intel graphics drivers. i then took the 10.10.3 QE/CI drivers inc frame buffer and added them to the installer. I've now managed to boot in to...

It's an official download from the Mac App Store. Plasma

Ok so I removed them all and it still just boots to the last command line screen I posted above. Never loads the GUI and never gets any further. Plasma

I've amended my profile. I did not initially, however the guide points to another page which gives conflicting information. One says remove: AppleIntelHDGraphics.kext AppleIntelHDGraphicsFB.kext I tried this first, the other says remove all .. AppleIntelHD* AppleIntelSNB* AppleIntelFrame*...

Ok, I got the graphics card name from the existing Mavericks apologies for that. I've started completely from scratch and followed the guide on that page. I'm booting with '-v -f -x cpus=1 dart=0 nv_disable=1' I get the usual stuff last capture from the terminal is: I assume its then...

I've tried adding -f to the flags as well, gets stuck at the same place. I know the installers are slow have done quite a few and the Mavericks installer took about 30 mins for the GUI to appear. I've left this one at that screen for over an hour now and there's still no sign of life. :roll2...