Hey thanks guys.
As i'd mentioned earlier, the USB was made with UEFI support and i was trying to boot with legacy settings in BIOS mode. Finally i realised my mistake, changed BIOS settings and was able to install El Capt on the build. Yayee !!
But then strangely, i was only able to boot my...
Ok. I had made my USB with UEFI support and kept my BIOS to boot with legacy.
:roll2::roll2::roll2::roll2:
So finally i am getting to install el capitan. Will report my further findings.
Seems like a bad day for me.
I am trying to create a bootable pen drive with Unibeast 5.0.1 and my older mavericks installer. And now all i get is this.
What should i do now?
I have an iMac.
I lost my previous USB, i used to boot my hackintosh.
Do u suggest i should make another USB, boot back to yosemite with the older setup??
I could do that. The question is what to do after that??
What steps i took that went wrong? :banghead:
how can i remake the flash drive. I can't boot from my HD also.
I tried changing my USB, that didn't help too.
I've removed all USB devices and removed the HDMI monitor.
Also unplugged the ethernet cable.
When i did boot with this USB the first time around. Things went fine!!
Why am i facing...
I miserably got stuck at the Yosemite -> El Capitan update.
As recommended here's what i did :
* Was running Yosemite with unibeast + multibeast.
* Created the USB using unibeast 6.1.1
* System restart and ran a Yosemite boot from USB to see if things were fine.
* Boot went as usual.
*...
Thanks @colinzeal and @wildwillow.
I seem to be back on track now.
The BIOS seemed to have reset the settings.
I did find out out EvoReboot and installed it while in Safe Mode.
Then i also changed to AHCI and also changed the other settings on the BIOS from my previous known setup.
And now i...
@colinzeal how should i check that, the EvOre kext.
I did try this. I set up to boot in AHCI. I believe it had gone off earlier.
Now i can boot in Safe Mode only.
I get this weird transition lines like you get in a keynote presentation.
Can you please help me on this??
hey there.. i had to reinstall everything from scratch. Learnt a lesson and did a partition for running the OS and data separately. Things had been fine until today and the BIOS got corrupt again.
Yes, the BIOS got corrupt again. After about 5 months, it happened to do it again. The dual BIOS...
thanks @PresidentEvil I know of coolers that exist in the market, what i am specifically wanting to know is that if there is some way that i can ramp up the fan's RPM.
M using HWMonitor and i get to see that the Fan's RPM is stuck around 1200. Is there a way that i can pump this up?? I read...
Hey all,
I am running a GA B75M-D3H mobo on a i7-4770K processor.
My rig has been working fine until i started to work with some 'heavy' build softwares.
Now when i am operating under normal conditions,
The rig boots up at ~35˚C
Under normal conditions it rakes upto ~45˚C
When i start...
M having the same issue.
It was working fine with the earlier Mavericks hack, but now, the packager in itself is not opening up.
I seem to be unable to understand.
I believe the installer i have from AWUS is supported up till Mavericks.
Thats the only absurd guess that i can make.
Article: UniBeast: Install OS X Yosemite on Any Supported Intel-based PC
The Realtek ALC 887/888b current doesn't seem to be working fine.
Just got Yosemite running on my rig.
Things seem to be working fine except for sound.
Will post any more issues, once i run it thoroughly tomorrow.
Thanks...
Hi all,
I've been successfully running hackintosh on my rig GA B75M-D3H.
It worked like a breeze with complete compatibility, including App Store updates and Xcode and all.
Just a day before, i ran into a peculiar problem.
In the morning when i fired up the rig, it'd start and then restart...
Hi.
I recently did my first ever build and to say the least, installation with unibeast was a breeze.
I've used Unibeast 3.x and multi beast. I've setup Mavericks 10.9.4. Everything works, including audio and LAN. My motherboard is GA B75M-D3H.
Now this is the first issue i've encountered, as...
Unibeast Installation Error on Mavericks 10.9.4 :: EDIT :: Successful Installation
Hi,
I reinstalled Mavericks 10.9.4 and that was it. It worked.
My config ::
Mobo :: GA B75M-D3H
CPU :: i7 3770
Graphics :: Zotac Nvidia GTX 770 AMP edition
RAM :: 16 GB (4x4gb kingston)
HD :: 1TB WesternDigital...
Hi .. Please help. I updates Mavericks from 9.3 to 9.4 and still i'm getting an error.
M including the error log.
Jul 5 15:18:17 FISH-Interactive.local Installer[6976]: Install: "UniBeast Mac App Store"
Jul 5 15:18:17 FISH-Interactive.local Installer[6976]: Install: "Mac App Store Mavericks...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.