Hi,
great news! I have to do it, also. Just one question, though. In the original instructions one has to put in the name of bios <file.BIN>. Did you use the original bios name <Z390DESIGNARE.F9i> instead?
Thanks.
UPDATE:
Successfully downgraded from capsule BIOS to F9i.
Might be your PSU. I've been through a similar power issue and it took me quite some time to nail it down to a faulty PSU. If you have a spare one try that. Hope it helps.
I had a similar problem with my setup being unpredictable on shutdown/restart. In the end it was my new (!) CoolerMaster 650 PS. Funny thing is, it was tested on another rig and there were no problems with it. I think there must be some kind of incompatibility of my CoolerMaster and the...
Just wanted to report back.
After trying all the components in different combinations the culprit was my new Cooler Master 650 Gold PSU in combination with the Designare. It caused non-responsiveness of the mobo after shutdown. In my old system there is no problem with it. Weird. Now my...
Hi,
Some days ago I reported the same weird behavior on shutting/sleeping. (Yes, I followed all the points in this guide.) I have a Mojave (latest) Intel SSD in the upper M.2 slot and a SATA SSD with Win 10. A WiFi/BT card is sitting in the lower PCIe slot.
The problem appeared on BIOS F6...
My Designare Mojave on M.2 was running perfectly, everything just worked after following this awesome guide (iMacPro 1,1). I also have Win 10 on a separate SSD. 3200 Corsair RAM. But, lately, after going to sleep or on shutdown, I get a total lockup. (sometimes the LEDs on the MB go off and...
Hi,
I successfully updated my z68x build with i7 2600k cpu and rx560 from 10.13.6 to 10.14. The fcpx freezing reemerged and after spending A LOT of time on the forum here I finally nailed it. I think.
I enabled iGPU in bios, I have inject Intel enabled, lilu and weg kexts in...
If you're still in the dark check this amazing guy's work. Working flawlessly on my 10.11.5 P5W DH Q6600 :clap:
http://maudio.boards.net/thread/4/firewire-working-capitan-install-package
Thanks,
right now I'm scratching my head. Connected the wires. I connected my separate lcd controller from psu 12V, this controller feeds into a separate inverter all the required voltages. Thereby I totally bypassed the original inverter. Brightness control goes into lcd's inverter from smc...
Hi,
Excellent guide and discussion here, kudos to MacTester57. I spent quite some time here.
Bought cheap an iMac with broken display. Right now I've got an old laptop 17" 1680x1050 LCD with a cheap separate controller board with HDMI and it's working :-) . It also fits fine! I assembled the...
<Hi,
I dared to try the attached files on my n56vz and yes, virtually everything works now. Thank you very much. The only thing giving me pain is the nonworking audio. Any suggestions? Thanks.>
Nevermind, audio is working now.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.