Could you upload your working kext here? I have the same mainboard and no ethernet on Sierra with the Multibeast drivers. Your file would help me a great deal.
*bump*
I want to bump this thread as I experience similar issues with my audio. I run a GA-Z77-DS3H board under 10.9.2 with the 887/888 current audio drivers. The speakers are connected to the black jack on the back.
After several minutes of use, either browsing or spotify or similar, the...
I have a stable setup running now for some days (10.8 on GA-Z77-DS3H, i7 3770, GTX650) but I encounter every now and then smaller issues. Maybe someone can help me with this one:
When saving documents from different applications the folders I recently created don't show up. Only after some time...
Unfortunately I have no experience with powerPC installation of a hackintosh. Since the architecture of a PowerPC and an Intel Mac differ broadly it may be hard to get a stable system running. I suggest finding a friend's mac to create the multibeast boot stick.
Hey,
the screencaps will be hard to do as the mainboard only supports this feature on fat32 system disks and mine is already mac os x journaled. What Bios trouble do you have precisely? To me it sounds more like a problem with the drivers during booting. I always recommend to use the -x flag to...
I just had a look in the case, I have the rev1.0. The update process is straightforward if you have access to a windows machine were you can extract the self extracting zip archive provided on the gigayte homepage. You just put the extracted firmware on a USB stick, plug it in and start the...
Hi,
for your first question:
I did an motherboard update, which was a bit tricky to do on a mac, as gigabyte's archive is a self extracting .exe that only runs on windows. I did the update to the latest version and the used the optimized defaults with the SSD set to ACPI.
and for your second...
Thank you very much for your offer. I finally managed to get my system set up. The main problem was, that I created the Unibeast stick under Snow Leopard. Somehow this created a whole lot of problems that I didn't get when I later updated my snow leopard mac to mouontain lion and started from...
Did you do anything special for the installation? When I try it in the standard way the installation script stops at
ALXEthernet: Ethernet address 90:2b:34:3e:6c:4c
and i cannot just install ML. Any ideas or tips what you did?
system:
i7 3770
ga-z77-DS3H
HD4000 graphics
Article: Native Support in Mountain Lion- Ivy Bridge, HD 4000, GeForce 6xx
I plan to connect just like you a 2560x1440 screen to the HD4000 graphics uni over a DisplayPort. You seem to have solved the problem so I wanted to know how the HD4000 performs with a high res screen. Is it fast enough...
Hello everyone.
I am planning to build a i7 macx86 with relatively new components, so I did not find full information on all the parts. My potential setup is as follows:
Mainboard:
Gigabyte GA-Q77M-D2H
because it has a display port output capable of 2560x1600
CPU:
Intel i7-3770 IvyBridge...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.