Recent content by haylunx86

Many thanks!

I had the same error messages after BIOS flashing. I found that a new default setting is the cause of this problem I assigned "CDROM" to the media card reader in UEFI BIOS instead of auto detecting. The error messages are gone Media card reader working as usual

Hi kmrk30, I've successfully installed ML on mine last night. How did you get on? Is your built fully working? Did you add Network and/or Sound card? Any luck with AppStore and iCloud? They are not working here: "Unable to sign in" error.

I have a LG BluRay drive which prevents sleep. I use PleaseSleep to overcome this. Wake up is perfect with bluetooth keyboard. If I don't use PleaseSleep my built would try to enter sleep but resume immediately as the ODD activity light flashes. I think sleep would work to without...

Dear tamorgen, I too second genzai. tamorgen you are right DSDT is not necessary now with UEFI bios. I have achieved near perfect ML without DSDT here. However I think of DSDT as the filler in the gap between Gagabyte UEFI and Apple UEFI. I read that DSDT will be release after these BIOSes...

For coresme2 and other blessed owners of GA-Z68MX-UD2H-B3 with UEFI BIOS U1c My Step to step to ML Bliss: My Kit: GA-Z68MX-UD2H-B3 Rev 1.0 UEFI U1c i7 2600s (65W with only HD2000, not HD3000) 2x4GB DDR3 Vengeance Blue 1600 running at 1333 Asus Radeon 6670 1024Mb Fanless Graphic Card...

With PATA you could set master/slave/CS but its better now with SATA not just for bandwidth. The IDE ribbon able connects upto 2 devices and the slower device bottleneck the whole chain. Now SATA are almost independent. Also slim SATA cables are much better with air flow and cable management...

Dear Ichibection, You need to install UpdateHelper, which is specification made for updating to 10.6.8. It is available via the Resources>Downloads here.

The absolute must have BIOS setting is ACHI mode on all SATA controllers. I am guessing this is your current storage attachments: SATA3-port0: Windows SSD SATA3-port1: 2TB HDD for storage SATA2-port3+: OSX SSD Am I guessing right? If I am then why OSX SSD isn't on SATA3 connector to get...

Dear coreme2, We are using the same motherboard and BIOS version. However we have different graphics. Some are using CPU builtin graphics which is well documented and supported natively now by OSX. Others are using discrete graphic cards. Those uses discrete graphic card usuall as real mac...

I think TRIM enabler in MB4.6.1 is not essential to have a bootable system. However I have tested if ML will natively enable TRIM in one of my "trial and error" cycle by not selecting TRIM in MB. It was detected "No" in System Report. If your build is particularly challenging then it would be...

I have UEFI now. My fix above didn't need replacing kext in ML from Lion. Just make sure SDD/HDD is on Port0 and ODD is on Port1 of the "white" SATA3 connectors. My Eject button work just like before as in Lion with instant OSD and fail too after use of MakeMKV just like in Lion. To...

Finally it back again to full glory. Working great here! Geekbench full speed and even better than Lion with Award BIOS. AppStore, iTune Store, iCloud, native Network with WOL, Sleep and wake with bluetooth keyboard, Graphic@2560x1440 with acceleration. After many reinstall, trial & error...

up slightly to 10440 from 9940

try with ssdt