Is igpu disabled in BIOS? If not, do it. You also need to run AGDPfix. Do a search. It is on other site. You have to run AGDPfix after every install of new nvidia drivers.
Did you use Clover Configurator to configure your UniBeast USB flash drive as explained in guide? Did you Enter Fake ID For the Kaby Lake Processors 0x0506E3? After Sierra installed and rebooted did you still use USB flash drive to get into Sierra? Is the flash drive attached to a USB 2.0 port...
I added FakeSMC.kext to the other folder and was able to go into recovery. I was then able to disable SIP. Is it worth going back to 16,2? Does this have any advantages or improvements to performance?
Looks like a good build. I find it really odd that there is no discernible difference between the GA-H270N-WIFI and GA-Z270N-WIFI. Is the only difference memory support? Are you going with the stock cooler on the i5-7400? Do you know which GTX 1060 you are going with?
I tried both command + R and booting to recovery partition (by selecting it at clover menu). I was unable to get to recovery using either method.
I changed to 14,2 and all is good. If I can ever figure out how to get to recovery I may go back to 16,2.
I tried command+R and choosing the recovery partition and I was unable to get into recovery. Progress bar gets about 3/4 of the way and locks up. Are there any negatives running 14,2 versus 16,2?
Installed 10.12.5 and when I run AGDPfix I get the message about disabling SIP. Weird, that did not happen last time. I'm having difficulty booting into recovery mode to disable SIP. I press and hold down windows+R while booting and I do not go into recovery mode. Any help out there?
I did use F9. That was not an option. USB was option but when I chose it I got the DD BIOS error. The USB was corrupted. When I made new Clover boot USB it worked.
I did not get too far into multibeast before deciding I'm not going to try it. The Yosemite version has Chimera and I want Clover...
Sorry, I was not clear in my post. I did use the USB to boot. It did not boot to Clover. I got the message with USB. Since I posted I have determined that somehow I corrupted the USB. There was not a 200 mb fat32 partition. I created a bootable clover USB with Bootdisk Utility (I'm on Windows...
I made some changes to the boot usb and Yosemite appeared to install to hard drive. When I booted after this I do not get to clover and I get message:
DD EBIOS
No operating system
I have searched forums for this and I did not find anything. Any ideas? Thanks!
After doing some reading I figured out you have to install Windows 10 with the optical drive in it's UEFI mode. For some reason it does not do this automatically when installing from DVD at boot. I did this on the reinstall of Windows 10 and it now has EFI partition. I figured I would need to...
I could not find an EFI partition on my windows drive do I decided to reinstall Windows 10. I have now reinstalled windows 10 twice. Both times I did not get an EFI partition. I'm not finding it in Clover Configuator and I'm not finding it with Diskpart in Windows recovery. The install has a 500...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.