Recent content by allgreyarea

Just installed 10.10.3 and no issues.

Have you tried another USB stick? I haven't done this work with r3142, but don't see why you would have an issue. Another thing to try would be to boot a real mac with the USB stick to see if it's not the installer that was made. Side note, I am running 10.10.2 on this configuration and am...

Skip bootcamp. You'll want to do an install of Windows either to another drive and setup Clover to boot to that Windows drive OR run Fusion. I run Fusion inside OS X and it's very nice. I haven't taken the time to try and dual boot Windows in Clover. I know it's relatively simple. From the...

First of all, sorry for not getting back to everyone sooner. I've been remodeling my house and that's taken up most of my time. I did. All 3 antenna's are on there. What I figured out is that it's only when I'm doing large file copies (think saturating I/O) to my NAS that the drop occurs. I...

This doesn't sound like Clover. It sounds like a configuration issue in your BIOS. 1. Has your USB installer booted yet? 2. Is your BIOS set to boot to USB? 3. What USB port are you using? I booted both form my front USB 3.0 ports and the 4 USB 2.0 ports in the back (the ones that say "USB DAC...

Have you tried to boot by removing your bluetooth hardware? You'll want to boot with as many things unplugged as possible. I've heard of people installing with just 1 stick or RAM. Try that. Could the drive be locked somehow? Is this a new drive or have you used it before.

I listed what BIOS settings I have set in the original post. Those are the only options I changed. First, I selected "Load Optimized Defaults". Then, I changed everything as I had listed on the original screen. You say "I never get to the install window." What do you see on your screen?

[SUCCESS] Gigabyte Z97MX-Gaming 5, i7 4790k, 16 GB 1600 Mhz DDR3, Onboard Graphics This is extremely easy to deal with. Apple fixed mine in under 2 minutes. 1. Generate a serial number for your mac if you don't already have one. 2. There is online chat . Go to https://getsupport.apple.com/...

If it's any help, I created a guide for the Z97MX-Gaming 5 with Yosemite and Clover at http://www.tonymacx86.com/yosemite-desktop-guides/145779-success-gigabyte-z97mx-gaming-5-i7-4790k-16-gb-1600-mhz-ddr3-onboard-graphics.html I'd try to get your machine working without the graphics card and...

[SUCCESS] Gigabyte Z97MX-Gaming 5, i7 4790k, 16 GB 1600 Mhz DDR3, Onboard Graphics Awesome! Were you using the same Bluetooth dongle or a different one? On a side note, I see you're using a graphics card that isn't onboard. Have you tried multiple monitors or had any issues with it? When I...

[SUCCESS] Gigabyte Z97MX-Gaming 5, i7 4790k, 16 GB 1600 Mhz DDR3, Onboard Graphics I haven't tried overclocking yet. I'm in the same boat. Change as few items as possible until I'm certain a part of the hardware is stable.

[SUCCESS] Gigabyte Z97MX-Gaming 5, i7 4790k, 16 GB 1600 Mhz DDR3, Onboard Graphics I haven't had any issues with my Bluetooth dropping in and out. 1. What keyboard and mouse model are you using? 2. Does your Bluetooth keyboard and mouse work when you get into the Clover bootloader? Mine...

[SUCCESS] Gigabyte Z97MX-Gaming 5, i7 4790k, 16 GB 1600 Mhz DDR3, Onboard Graphics Awesome! What ended up fixing the issue?

[SUCCESS] Gigabyte Z97MX-Gaming 5, i7 4790k, 16 GB 1600 Mhz DDR3, Onboard Graphics You can. I haven't done it yet, but you can. For now, boot your machine into safe mode and read your boot logs. Let me know what those say or attach them to the machine. To do that... Startup your machine...

[SUCCESS] Gigabyte Z97MX-Gaming 5, i7 4790k, 16 GB 1600 Mhz DDR3, Onboard Graphics Good call out! USB3 works. Hardware Profile posted below. App store works as well. I haven't signed in with iTunes yet as iMessage was being wonky. I want to makes sure when I work through the iMessage issue and...