Mountain Lion: MultiBeast - No Audio/Solutions and Problem Reporting

[toleda]

A copy of my reg as requested, someone pls help this noob!

Verify HD Audio is enabled in the BIOS. Try MultiBeast 5.2.1 or newer - Select/Drivers & Bootloaders/Drivers/Audio/Realtek ALC8xx/Without DSDT/ALC889. Reply with new IOReg.

 

[yigityuk]

yigityuk - GA-Z77X-UD5H Audio Problem Reporting

Hello!
This is my first mackintosh. And i got almost everything up and working except audio. I am trying to use internal audio but even though my ports show up in audio settings, i can't get any sound out of them. And when I had checked I saw that my PinConfigurations value is not as it should be. But I am pretty sure I had installed the right codec :/


I would be glad if you can help me.


My system info and procedure i have tried are as below. I have also attached the IOreg and required screenshots.
Gigabyte GA-Z77X-UD5H Bios@F14, i3570k, 10.8.2 HD4000
MultiBeast 5.2.1 Without DST Select/Drivers & Bootloaders/Drivers/Audio/Realtek ALC8xx/Without DSDT/ALC898


View attachment yigityuk_20130121.zip

 

[toleda]

I am trying to use internal audio but even though my ports show up in audio settings, i can't get any sound out of them.

The GA-Z77X-UD5H has serious problems iwith OS X audio. If your motherboard is a Rev 1.0, there is no green port audio, front or rear. Try the 1st Line Out and the black port or the 2nd Line Out and the orange port. Search GA-Z77X-UD5H audio for more information. If you have a Rev 1.1, all audio ports should work. The pinconfigs are correct. See ML: MultiBeast - No Audio/Solutions and Problem Reporting.

 

[toleda]

Toleda how you arrived settings binary AppleHDA.kext / MacOS / AppleHDA?
I see the DevID : 10EC0892, but do not understand how to get Struct:
Note that the DevID is in red!!
But how to get the result that is blue(Struct)?

A lot of testing. I ended up with the same edit for six ALC8xx codecs.

 

[toleda]

A copy of my reg as requested, someone pls help this noob!

Download and install this app, DPCIManager 1.3 w/ Kext Suggestions and BIOS ROM Flashing. Reply with a screenshot of Status.

 

[stratbasher]

OSX 10.8.2

ACL887

Hardware:
Inspiron 560
Intel Pentium Dual-Core E5700
Galaxy nVidia Geforce GT640 1GB (with rom loaded in chameleon)
4GB Ram
Upgraded from 10.8. Can run 10.7

Non-DSDT

No input/output devices are detected.

Layout ID of HDEF@1B is 1
Everything seems to be working, and the IOHDACodecDriver reports that my device ID is the 0x10ec0887.

My problems with troubleshooting begin when I look up the Pin Configuration, and it is just <>. Also, I have no AppleHDA driver appearing in IOReg.

Furthermore, here's a spit of my booting errors...

Feb  1 17:20:58 Adams-Mac-Pro kernel[0]: HDAEnabler: Copyright (c) 2008 by Kabyl
Feb  1 17:20:58 --- last message repeated 1 time ---
Feb  1 17:20:58 Adams-Mac-Pro kernel[0]: HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
Feb  1 17:20:58 Adams-Mac-Pro kernel[0]: HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
Feb  1 17:20:58 Adams-Mac-Pro kernel[0]: HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
Feb  1 17:20:58 Adams-Mac-Pro kernel[0]: HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
Feb  1 17:20:59 Adams-Mac-Pro kernel[0]: Previous Shutdown Cause: 3
Feb  1 17:21:00 Adams-Mac-Pro kernel[0]: Sound assertion - Command/Response TIMED OUT and ( kRequestStateMatch == fCodecRequest->state = 2 ), fCodecRequest->command->codec: -549524031744, fCodecRequest->command->verb: 0x300F0000, fPoweredDown: 0
Feb  1 17:21:00 Adams-Mac-Pro kernel[0]: Sound assertion in AppleHDAController at line 5097
Feb  1 17:21:00 Adams-Mac-Pro kernel[0]: Sound assertion in AppleHDAController at line 5098
Feb  1 17:21:00 Adams-Mac-Pro kernel[0]: Sound assertion in AppleHDAController at line 4399
Feb  1 17:21:00 Adams-Mac-Pro kernel[0]: NVDAGK100HAL loaded and registered.
Feb  1 17:21:00 Adams-Mac-Pro kernel[0]: Sound assertion - Command/Response TIMED OUT and ( kRequestStateMatch == fCodecRequest->state = 2 ), fCodecRequest->command->codec: -549524031744, fCodecRequest->command->verb: 0x300F0000, fPoweredDown: 0
Feb  1 17:21:00 Adams-Mac-Pro kernel[0]: Sound assertion in AppleHDAController at line 5097
Feb  1 17:21:00 Adams-Mac-Pro kernel[0]: Sound assertion in AppleHDAController at line 5098
Feb  1 17:21:00 Adams-Mac-Pro kernel[0]: Sound assertion in IOHDACodecDevice at line 161
Feb  1 17:21:04 Adams-Mac-Pro.local apsd[58]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
Feb  1 17:21:04 Adams-Mac-Pro kernel[0]: ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out
Feb  1 17:21:04 Adams-Mac-Pro kernel[0]: Sound assertion in AppleHDACodecGeneric at line 133
Feb  1 17:21:05 Adams-Mac-Pro kernel[0]: Sound assertion in AppleHDACodecGeneric at line 360

Attached is the output. I have a USB headset plugged in, so there will be some other audio stuff in here.View attachment ioReg.zip

 

[toleda]

No input/output devices are detected.

See DPCIManager 1.5 Open Beta, reply with Status screenshot.

 

[stratbasher]

It crashes. When I open it up, It waits for a few seconds, then just crashes. Here's the dump of dscpi....

Using PCI.IDs 2013.01.24
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 03) (subsys 1028:0439)
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e21] (rev 03)
00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (subsys 1028:0439)
00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (subsys 1028:0439)
00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (subsys 1028:0439)
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e] (subsys 1028:0439)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40]
00:1c.2 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 [8086:3a44]
00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (subsys 1028:0439)
00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (subsys 1028:0439)
00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (subsys 1028:0439)
00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (subsys 1028:0439)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16] (subsys 1028:0439)
00:1f.2 SATA controller [0106]: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller [8086:3a22] (subsys 1028:0439)
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30] (subsys 1028:0439)
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) (subsys 1028:0439)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK107 [GeForce GT 640] [10de:0fc1] (rev a2) (subsys 10de:0010)
01:00.1 Audio device [0403]: NVIDIA Corporation GK107 HDMI Audio Controller [10de:0e1b] (rev a1) (subsys 10de:093c)
logout

[Process completed]

EDIT: Attached proof of my chipset.

 

[toleda]

It crashes. When I open it up, It waits for a few seconds, then just crashes. Here's the dump of dscpi....

The tool tells me if OS X sees your codec. Your system seems to have an ugly set of problems. Suggest a clean install.

 

[stratbasher]

So go back to 10.8 clean, then 10.8.2, no extras in-between?