- Joined
- Jan 5, 2011
- Messages
- 3
- Motherboard
- Gigabyte Z68X-UD7-B3 F10
- CPU
- i7 2600k
- Graphics
- Quadro 4000
- Mac
- Mobile Phone
I followed the Unibeast guide to the best of my ability to get a fresh install of El Capitan. Fighting with no video upon booting into the OS, I found I had to replace the Graphic Controller kext with one I found online to get video again. However now my issue is that I have no audio after running the CloverALC110 script. I have a Gigabyte Z68X-UD7-B3 w/F10 bios. The onboard audio is ALC 889. I run the script with Audio ID 1 and after restart still have no audio. I mounted the EFI partition with Clover Configurator. My drive is labeled ElCapitan (no spaces as some suggested). If there needs to be edits done to my DSDT, I'm not sure how to do that with Clover Configurator. Thanks in advance! Here is what the script shows.
EFI partition is not mounted
Confirm Clover Legacy Install (y/n): y
ElCapitan/EFI folder found
System Integrity Protection status: enabled (Custom Configuration).
Configuration:
Apple Internal: disabled
Kext Signing: disabled
Filesystem Protections: disabled
Debugging Restrictions: disabled
DTrace Restrictions: disabled
NVRAM Protections: disabled
This is an unsupported configuration, likely to break in the future and leave your machine in an unknown state.
OK to patch
Confirm Realtek ALC889 (y/n): y
Audio ID: 889 is not supported, continue (y/n): y
Clover Audio ID Injection (y/n): y
Use Audio ID: 0 (y/n): n
Audio IDs:
1 - 3/5/6 port Realtek ALCxxx audio
2 - 3 port (5.1) Realtek ALCxxx audio (n/a 885)
3 - HD3000/HD4000 HDMI and Realtek ALCxxx audio (n/a 885/1150 & 887/888 Legacy)
Select Audio ID: 1
EFI partition is not mounted
Confirm Clover Legacy Install (y/n): y
ElCapitan/EFI folder found
System Integrity Protection status: enabled (Custom Configuration).
Configuration:
Apple Internal: disabled
Kext Signing: disabled
Filesystem Protections: disabled
Debugging Restrictions: disabled
DTrace Restrictions: disabled
NVRAM Protections: disabled
This is an unsupported configuration, likely to break in the future and leave your machine in an unknown state.
OK to patch
Confirm Realtek ALC889 (y/n): y
Audio ID: 889 is not supported, continue (y/n): y
Clover Audio ID Injection (y/n): y
Use Audio ID: 0 (y/n): n
Audio IDs:
1 - 3/5/6 port Realtek ALCxxx audio
2 - 3 port (5.1) Realtek ALCxxx audio (n/a 885)
3 - HD3000/HD4000 HDMI and Realtek ALCxxx audio (n/a 885/1150 & 887/888 Legacy)
Select Audio ID: 1