Panic CPU 2 caller

Hello, at first I'm sorry I'm creating thread in desktop forum, but I didn't find forum for laptops here. Here's my problem:
I created bootable USB following guide, but when I choose to Boot Mac OS X from USB, there's apple logo and progress bar goes to about 30%, then it stucks and after short time, panic message appears (pic). After this, notebook restarts and I'm at Clover Boot Screen again...
I also tried to enter bootflag nv_disable=1 but there was still that panic message.

Notebook parameters:
Model: ASUS N75S
MB: N75SF (CPU 1) 1.0
CPU: Intel Core i7 2630QM (Quad-core)
GPU: 1. Integrated Intel
2. NVIDIA GeForce GT555M 2GB
RAM: 1x2GB + 1x4GB (665.1MHz)

+ When I was creating USB in Unibeast, I chose Intel 3000 graphics and Legacy boot mode instead of UEFI (if UEFI was chosen, it didn't boot and I don't know why, my NB supports UEFI...)

pic


I'll be thankful for any advice.

Moved to Laptop Support.

kokotpica said:

Hello, at first I'm sorry I'm creating thread in desktop forum, but I didn't find forum for laptops here. Here's my problem:
I created bootable USB following guide, but when I choose to Boot Mac OS X from USB, there's apple logo and progress bar goes to about 30%, then it stucks and after short time, panic message appears (pic). After this, notebook restarts and I'm at Clover Boot Screen again...
I also tried to enter bootflag nv_disable=1 but there was still that panic message.

Notebook parameters:
Model: ASUS N75S
MB: N75SF (CPU 1) 1.0
CPU: Intel Core i7 2630QM (Quad-core)
GPU: 1. Integrated Intel
2. NVIDIA GeForce GT555M 2GB
RAM: 1x2GB + 1x4GB (665.1MHz)

+ When I was creating USB in Unibeast, I chose Intel 3000 graphics and Legacy boot mode instead of UEFI (if UEFI was chosen, it didn't boot and I don't know why, my NB supports UEFI...)

pic
View attachment 176720

I'll be thankful for any advice.

Click to expand...

Follow the Clover guide linked from the FAQ.

http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Thanks for answer, I followed instructions and edited config.plist but now I'm getting panic cpu 0 caller message. It says that driver for IOPlatformExpert.cpp cant be found... Can you please tell me what to do?

kokotpica said:

Thanks for answer, I followed instructions and edited config.plist but now I'm getting panic cpu 0 caller message. It says that driver for IOPlatformExpert.cpp cant be found... Can you please tell me what to do?

Click to expand...

Boot verbose, show photo. Post EFI/Clover folder as ZIP (omit 'themes' folder).

kokotpica said:

verbose mode
View attachment 177106

Click to expand...

You did not follow the guide.

Problems:
- profile is not filled out per guide
- config.plist is not one of those linked from the guide
- NullCPUPowerManagement.kext is not recommended by the guide
- VoodooPS2Controller.kext is not a current build (eg. not the kext linked from the guide)

You're right I missed some steps, sorry for that... But now I did my best to follow your guide step by step. Although panic screens stopped to show, there's something else now - when I try to boot installer, and progress bar is about about 60%, apple logo changes to this


and ater few seconds message shows


here's readable version of that screen (verbose mode)


As last bar is regarding BT control, I tried to deactivate it in BIOS, but it didn't worked. Should I try to put some BT kext into Clover kexts?

kokotpica said:

and ater few seconds message shows
View attachment 177237

Click to expand...

It is "still waiting for root device"... Means you have a USB problem. Try all USB ports (esp. USB2).

I have tried all USB ports (2x2.0 and 2x3.0). On 2.0 ports, that weird logo shows up. 3.0 ports don't work, even Clover didn't boot from them. I think I should try other USB stick a maybe it'll work?