RehabMan
Moderator
- Joined
- May 2, 2012
- Messages
- 181,058
- Motherboard
- Intel DH67BL
- CPU
- i7-2600K
- Graphics
- HD 3000
- Mac
- Mobile Phone
HDMI out is not working (as expected) and thunderbolt 3 is not recognised,
Both as expected.
HDMI out is not working (as expected) and thunderbolt 3 is not recognised,
@RehabMan
My SSDT-Zbook-G3-Skylake.aml file has the following lines under RMCF
Name (IGPI, Zero)
Name (LMAX, Ones)
Name (BUID, Zero)
Name (DGPU, 0x03)
Name (BKLT, One)
Name (SHUT, Zero)
Name (XPEE, One)
The comments for DGPU are
// DGPU: Controls whether the DGPU is disabled via ACPI or not
// bit 0: DGPU disabled at startup
// bit 1: DGPU enabled in _PTS, disabled in _WAK
// default is 3
You told me before to set DGPU to 0, but in the comments "bit 0" is to disable the DGPU, that is what got me confused.
Could you explain how the line should look?
Like this?
Name (DGPU, Zero)
Thanks
Both Name(DGPU, Zero) or Name(DGPU, 0) are the same thing.
Do you think the WhateverGreen Lilu plugin will help enabling the GPU in this laptop? In my case It is a quadro M1000M
Has your card M1000M worked yet?Do you think the WhateverGreen Lilu plugin will help enabling the GPU in this laptop? In my case It is a quadro M1000M
Your trackpad is ALPS. My driver supports Synaptics. You can enable VoodooPS2Mouse.kext for your ALPS trackpad by enabling the mouse in the model specific SSDT.
You can see how it is done if you look at the SSDT for 1020/1030/1040:
Code://#include "include/standard_PS2K.asl" External(_SB.PCI0.LPCB.PS2K, DeviceObj) Scope (_SB.PCI0.LPCB.PS2K) { // overrides for VoodooPS2 configuration... Name(RMCF, Package() { #include "include/standard_PS2K_data.asl" #include "include/enable_mouse.asl" }) }
Or you can look for PS2 kexts that correspond to ALPS.
Hi Rehabman,
I apologize for re-opening up this thread after such a long time. I still had no luck finding a ALPS driver the Zbook. I am going to try patching the SSDT but I have never done it before. Thank you for providing the sample code. Could you link me to the SSDT 1020/1030/1040 that you are referencing? I can't seem to find the sample code. Thank you in advance.