Z87X-UD5H unibeast 3.0.1 unable to install 10.9

[PolishTea]

Resolved, kinda:

After a few more experimentations the board's USB ports stopped sending data (devices would power but not send signals) even at the BIOS screen with no hard drives attached at all.

Board was returned as defective, replacement board worked on first boot, no drama. Can't get the usb BT adapter to work yet but that's hardly a concern comparatively.

 

[cutzzz14]

I've set the BIOS options to:
XHCI Hand-off: Enabled
EHCI Hand-off: Enabled
Intel Virtualization: Disabled
XHCI Mode: Auto (not Smart Auto)
VT-d: Disabled
SATA ports were by default set to AHCI.

I've gone through several flag options, and combinations of:
-x, npci=0x3000, npci=0x2000, PCIRootUID=0/1 and GraphicsEnabler=No/Yes and still can't get to the installer.

I've also reformated and reinstalled the Unibeast 10.9 USB stick twice using Unibeast 3.0.1

when I use verbose mode I see these same errors constantly:
BootCacheControl: unable to open var/db/BootCache.playlist: 2 No such file or director
Previous Shutdown Cause: 5
SMC::smcInitHelper ERROR: MMIO regMap == NULL fall back to old SMC mode
hmm.. mismatch sizes 3100 vs 20
ACPI_SMC_PlatformPlugin::start-waitForService(resourceMatching(AppleIntelCPUPowerManagement)
-- power management may be incompatable or unsupported


Specs:
P8Z77-V
i7-3770K
2x8gb Ram (Corsair Vengence)
SATA-500GB


Pls Help me