Z87-hd3 with i5-4440 can't install

[wassem]

Hi
i have this system
gigabyte z87-hd3 bios version f6
intel i5-4440
western digital 500 gb
two sticks of 4 gb patriot 1600
samsung dvdrw
microsoft wireless set 2000
onboard graphics

i followed this guid trying to install maverick with no luck many times I get CPU not supported what is the right configuration in bios for installing osX


when I follow this
2. Set to Optimized Defaults.
3. (Optional) Set X.M.P. Memory Profile to Profile1
4. If your CPU supports VT-d, disable it

i get
this is an unknown CPU model 0x3c

 

[wildwillow]

What TV/Monitor and cable are you using? Have you tried typing GraphicsEnabler=Yes at the Chimera boot screen.

 

[wassem]

I tried this BIOS


Load optimizing
memory setting -> Profile 1
VT-D -> Disable
XHCI Mode -> Smart Auto
XHCI Hand-off -> enabled
EHCI Hand-off -> enabled

with -x -v in boot and get the same pic in the first post

 

[wassem]

We'll I am using mag LCD 24" with the usual blue VGA cable

 

[wassem]

I tried with second bios setting with -x -v GraphicsEnabler=yes

and got the same error

 

[wildwillow]

We'll I am using mag LCD 24" with the usual blue VGA cable

This is your problem. The VGA General Information on Display Preferences

 

[sqishy]

Try DVI cable, is USB in the port above the PS2 Port (black USB not Blue)

 

[wassem]

I am trying now with dvi cable

and I changed the USB from usb3 to usb2 which is above beside keyboard

and there u go working and I got to setup

with the original bios setting
1. To access BIOS/UEFI Setup, press and hold Delete on a USB Keyboard while the system is booting up
2. Set to Optimized Defaults.
3. (Optional) Set X.M.P. Memory Profile to Profile1
4. If your CPU supports VT-d, disable it
5. Save and exit.


let me update you in a minutes

thank you guys

 

[wassem]

What is Gigabyte GA-Z87-HD3 multibeast setup

 

[wildwillow]

What is Gigabyte GA-Z87-HD3 multibeast setup

How To Know What To Install With MultiBeast