<< Solved >> Z390m Gaming Motherboard Mojave install Stuck

[cmert]

Hello

This is my first Hackintosh build on z390m motherboard + i5 8400 + rx570 + m2 sata 860 samsung hdd...
Ive downloaded Mojave made a installer w unibeast + added multibeast to the installer usb ...

Started my computer, did bios settings and booted computer w usb stick..

After install starts my it freezes around %70...

any advice ???

ps: ive attached the screenshots of the install screen

 

[cmn699]

Hello

This is my first Hackintosh build on z390m motherboard + i5 8400 + rx570 + m2 sata 860 samsung hdd...
Ive downloaded Mojave made a installer w unibeast + added multibeast to the installer usb ...

Started my computer, did bios settings and booted computer w usb stick..

After install starts my it freezes around %70...

any advice ???

ps: ive attached the screenshots of the install screen

• From your uploaded Boot screen, it looks like you have a USB port file transfer problem causing that "Prohibited Entry Sign" error.
• This can be from any of the following
• Your BIOS listed options for USB controllers: NOT ENABLED
  • In Gigabyte BIOS they are under Peripherals
• Problem with CLOVER
  • Lack of proper USB support kexts like USBInjectAll.kext and XHCIunsupported.kext in CLOVER/kexts/Other and/ or
  • config.plist _Devices_USB lacking [√]Inject [√]FixOwnership
• It can also be related to a USB port on your Desktop that fails during Boot especially in a USB 3.0 port, This requires switching the Installer to other ports by trial and error until you find the right port most likely at the back of the case.
• Uploading a zipped CLOVER folder from your USB installer will be a good idea for someone to check it for you.
• For the steps to get CLOVER from USB installer, check bulleted steps here->#4

 

[cmert]

Thanks for the quick and informative reply cmn699,

My motherboard only have usb 3.0 ports, I tried every port on the back of my computer, and usb 3.1 port worked like a charm, my install was starting, I saw Mojave start screen but now I can't see the m2 samsung drive to install Mojave on it?
I can see it in bios menu but not in Mojave install screen ???

how can I see it back again ??

 

[cmert]

Now I can see clover install screen, but I can't come to Mac OS install screen anymore apple logo shows, suddenly black screen ...

 

[cmert]

Now im in MOJAVE install screen,
but I can't see my m2 samsung drive
that im going to install osx on it...

 

[cmn699]

Now im in MOJAVE install screen,
but I can't see my m2 samsung drive
that im going to install osx on it...

• In that Disk Utility screen , you have to Erase the disk as GUID+APFS
• To do this properly, you have to find the Entire disk not the Volumes
• To find the Entire Disk, from Menubar on top, locate and click View[√] Show All Devices [Not Show Only Volumes See uploaded Image of DU]
• Erase GUID+APFS (Not Mac OS Extended (Journaled)

 

[cmert]

I know, I am seeing the entire disk, but I can't see the m2 disk in that screen, I only can see the usb drive...

do you mean that I need to Erase GUID+APFS the usb installer ...


in other videos, other people can see the other m2 disk image, thats where im confused...

thank you for your support cmn699


all the best
C.

 

[cmert]

I can't install it cause I can't even see the root of m2 hdd to erase guid + apfs ...

thank you for replies...
C

screenshot below is not mine...

 

[cmn699]

I can't install it cause I can't even see the root of m2 hdd to erase guid + apfs ...

thank you for replies...
C

In the above CBM screen, I see next to your USB Installer disk, what looks like a "Mac Volume".
What is it?
Is that the disk you were going to install the Mojave?
Where was it Erased? A blank HDD /SSD, won't show up in CBM screen.
In your previous images from Disk Utility screen, I did not see you opening View> Show All Devices
When you did that apparently the SSD was not seen?
What is the Brand of the m2 HDDs?
Some disks were known to have problems .
I cannot name then off the top of my head at this moment
In macOS Utilities , go to Utilities>Terminal and type diskutil list command to check if you can see your 'missing SSDs" (you saw them in BIOS) , through Terminal command.

Edited to add: The CBM screen is showing a High Sierra USB Installer , not Mojave USB Installer. Why?

 

[cmert]

Motherboard is z390m and it has 2 new firmware updates im doing them now, but I don't think its causing the problem...
If I can see the M2 drive in installer screen im good to go ... But I can't

The screenshot is the where im at now