- Joined
- Jan 28, 2021
- Messages
- 2
- Motherboard
- Z390 Aorus Pro
- CPU
- i9-9900K
- Graphics
- RX 5700 XT
- Mac
- Mobile Phone
Hello all
So for a while now, I've been trying to investigate on my end on how to get all of the USB ports (mostly USB 3.0) active ever since after the 11.3 update that happened a while back. As of right now, I have a USB 2.0 Hub on the back on the motherboard and I'm using my keyboard, mouse, Bluetooth adapter, scanner, audio interface (SSL 2+), and my Logitech C920 webcam.
I've taken out the USBInjectAll.kext as it didn't work for me after that particular update and that kext file hasn't been updated since I acquired it earlier this year.
Most of the USB 3.0 ports work, but to some extent. Such as I can only use a flash drive on any USB 3.0 front/rear and Disk Utility mounts it and be able to use it freely. But when it comes to a USB power device like my audio interface, that's a different story. It powers on and the device is lighten up, but the computer doesn't see it. And this happens when I try different ports on the back on my computer, and even the front two ports. Not just the interface, but my other powered devices.
I've exhausted as much solution as I can (unless there was something that I have missed).
I used USBMap.commmand to map out all the ports of my motherboard and two front USB 3 ports, and created a USBPort.kext. I dumped the file into my EFI folder, went into ProperTree, clean snapshot, restart, and didn't pick up.
Also went into Hackintool to clean up the USB list, and the number of ports was higher than usual. And I got nothing for that.
Last I went into the BIOS menu and toggled with the XHCI option, enabled the hand-off and nothing.
I was curious if anyone with the same motherboard had the same problem as I did. And if so, if someone can tell me what you did to get most of your ports working again. Or if have a kext that they're current using for the Z390 Aorus Pro can possibly share it to see if it was something wrong with mine.
Specs :
OpenCore 0.7.2
OS Build - Mac OS Big Sur
Version - 11.5.1
Motherboard - Z390 Aorus Pro (4 USB 2.0, 3 USB 3.0, 2 USB 3.1, & 1 USB C)
GPU - RX 5700 XT
Case - Corsair 200R Case (2 Front USB 3.0)
The USBMap below shows that the last USB list has a SanDisk flash connected but there is not. It was only to make sure the ports were active when I was seeing what ports was working or not.
I hope this all makes sense, felt like I was rambling. But hope to hear soon. Thank you guys.
So for a while now, I've been trying to investigate on my end on how to get all of the USB ports (mostly USB 3.0) active ever since after the 11.3 update that happened a while back. As of right now, I have a USB 2.0 Hub on the back on the motherboard and I'm using my keyboard, mouse, Bluetooth adapter, scanner, audio interface (SSL 2+), and my Logitech C920 webcam.
I've taken out the USBInjectAll.kext as it didn't work for me after that particular update and that kext file hasn't been updated since I acquired it earlier this year.
Most of the USB 3.0 ports work, but to some extent. Such as I can only use a flash drive on any USB 3.0 front/rear and Disk Utility mounts it and be able to use it freely. But when it comes to a USB power device like my audio interface, that's a different story. It powers on and the device is lighten up, but the computer doesn't see it. And this happens when I try different ports on the back on my computer, and even the front two ports. Not just the interface, but my other powered devices.
I've exhausted as much solution as I can (unless there was something that I have missed).
I used USBMap.commmand to map out all the ports of my motherboard and two front USB 3 ports, and created a USBPort.kext. I dumped the file into my EFI folder, went into ProperTree, clean snapshot, restart, and didn't pick up.
Also went into Hackintool to clean up the USB list, and the number of ports was higher than usual. And I got nothing for that.
Last I went into the BIOS menu and toggled with the XHCI option, enabled the hand-off and nothing.
I was curious if anyone with the same motherboard had the same problem as I did. And if so, if someone can tell me what you did to get most of your ports working again. Or if have a kext that they're current using for the Z390 Aorus Pro can possibly share it to see if it was something wrong with mine.
Specs :
OpenCore 0.7.2
OS Build - Mac OS Big Sur
Version - 11.5.1
Motherboard - Z390 Aorus Pro (4 USB 2.0, 3 USB 3.0, 2 USB 3.1, & 1 USB C)
GPU - RX 5700 XT
Case - Corsair 200R Case (2 Front USB 3.0)
The USBMap below shows that the last USB list has a SanDisk flash connected but there is not. It was only to make sure the ports were active when I was seeing what ports was working or not.
I hope this all makes sense, felt like I was rambling. But hope to hear soon. Thank you guys.