Alright... (Chamelon Success / Clover almost full success / USB 2.0 3.0 Issue after patch attempt)
So after using Tony's guide I have attempted and succeeded at installing Clover. (*80% there) I followed Tony's guide to a T so if anyone is worried about success or failure, so far so good.
Only issue on installation I had was finding the right combination of boot item / order in bios list to get Clover to show up. The one that worked showed a boot1: /6 then black screen for 15-20 seconds and then clover showed up. Install process was SLOW for me. Used 2.0 drive which was lightning fast when doing Chameleon install. This one took a while to load from OSX boot progress bar screen to install screen.
System:
Ga-77n-WIFI (f2 bios?)
16GB Ram
Samsung ssd 120
Intel 4000
Nvidia 660ti
Rocketfish Bluetooth
Here is what I found so far
Kexts used on EFI:
FakeSMC
Realtek ethernet
NullCPU
System sleeps, boots fast and am able to use USB 2.0 stock (2.0 usb in 3.0 port not found)
I attmpted to use MACIASL and the depository link by doing the following:
1. Added Depo to MacIASL
2. Opened my DSDT
3. I went to USB Multiplex fix for 77n (found in depository section)
4. Clicked apply
5. Closed Software
Rebooted
Upon Reboot I found that my mouse and keyboard (usb 2.0 combo on 2.0 port) was now not working like before (keyboard worked but mouse was frozen stuck in top corner). Unplugging and plugging back in fixed the issue but was replicated 3 reboots in a row to confirm. Without using that fix, mouse keyboard work perfect. Did I do something wrong???
My only other things that need to be fixed but don't know how: (these were all working with multi beast)
1. No audio: Using onboard ALC892 don't know how to get that working under clover boot loader / config (*always used multibeast)
2. Audio HDMI injection (intel): I want to patch to be able to also use intel 4000 hdmi audio as well (will be portable HTPC) (*used multi beast patch)
3. Need to install my Nvidia 660TI back into the system and get it recognized and doing the GPU work, but still maintaing Intel Video/HDMI out and it not disrupting my boot loader.
If anyone is working on this as well I would be glad to share DSDT.
Hope this helps