- Joined
- Aug 26, 2014
- Messages
- 4
- Motherboard
- ASRock Z97 Anniversary
- CPU
- Intel Core i5 4590
- Graphics
- NVIDIA GTX 970
- Mac
- Classic Mac
- Mobile Phone
Hello guys!
I tore my PC down to the Case and rebuilt it with a new MB, CPU, RAM, Video Card, and Power Supply. I am Making a Step By Step Install guide for my install. I'm hoping that my guide will help someone else with this Motherboard and Video Card.
Here are the components in my build
CPU: Intel Core i5 4590
MB: ASRock Z97 Anniversary
Ram: HyperX KHX1866C10D3/8G (16gb)
PSU: Corsair CX750M
Video: EVGA SSC ACX 2.0 NVIDIA GeForce GTX 970
I will update this tomorrow evening with my Progress (or Hopeful Progress) about this install and with the problems I run into. Please let me know if there is anything you would like specifics on.
UPDATE!!!
Well I can say I am up and Running on 10.10.3 now. Audio is working now and So is video. Only thing that doesn't work is iMessage but i'm not worried about that. gonna dabble around with this for a while. It's all on it's own dedicated HD so that isn't an issue.
When first installing flags: -x -v -nv_disable=1 IGPEnabler=No Maxmem=4096 -no-zp
After installed, things were VERY SLOW because of the graphics. I was doing all of this with the GTX 970
as my video card. I was connected to the DVI. (not sure if that will make any difference for anyone else.)
Once I was installed and booted in using the same flags again, Ran multibeast with the options below. Then installed the Nvidia Driver, rebooted with the flags -x -v IGPEnabler=No Maxmem=4096 -no-zp
once I verified graphics were working I ran Multibeast again to enable 1080p Display Mode under the CUSTOMIZE menu.
removed all my flags except for the following: kext-dev-mode=1 nvda_drv=1 PCIRootUID=1
Things I needed in MultiBeast:
DRIVERS
AUDIO
Realtek ALC887 (Current V100302),
Audio ID: 2.
Network
Intel AppleE1000e v3.1.0a
Disk
Intel Generic AHCI SATA
MISC
EvOreboot
FackeSMC v6.14.1364
USB 3.0 Universal
CUSTOMIZE
PCI Root ID Fix
IGPEabler=No
Hibernate Mode - Desktop
Hope this Helps.
Jeremiah
I tore my PC down to the Case and rebuilt it with a new MB, CPU, RAM, Video Card, and Power Supply. I am Making a Step By Step Install guide for my install. I'm hoping that my guide will help someone else with this Motherboard and Video Card.
Here are the components in my build
CPU: Intel Core i5 4590
MB: ASRock Z97 Anniversary
Ram: HyperX KHX1866C10D3/8G (16gb)
PSU: Corsair CX750M
Video: EVGA SSC ACX 2.0 NVIDIA GeForce GTX 970
I will update this tomorrow evening with my Progress (or Hopeful Progress) about this install and with the problems I run into. Please let me know if there is anything you would like specifics on.
UPDATE!!!
Well I can say I am up and Running on 10.10.3 now. Audio is working now and So is video. Only thing that doesn't work is iMessage but i'm not worried about that. gonna dabble around with this for a while. It's all on it's own dedicated HD so that isn't an issue.
When first installing flags: -x -v -nv_disable=1 IGPEnabler=No Maxmem=4096 -no-zp
After installed, things were VERY SLOW because of the graphics. I was doing all of this with the GTX 970
as my video card. I was connected to the DVI. (not sure if that will make any difference for anyone else.)
Once I was installed and booted in using the same flags again, Ran multibeast with the options below. Then installed the Nvidia Driver, rebooted with the flags -x -v IGPEnabler=No Maxmem=4096 -no-zp
once I verified graphics were working I ran Multibeast again to enable 1080p Display Mode under the CUSTOMIZE menu.
removed all my flags except for the following: kext-dev-mode=1 nvda_drv=1 PCIRootUID=1
Things I needed in MultiBeast:
DRIVERS
AUDIO
Realtek ALC887 (Current V100302),
Audio ID: 2.
Network
Intel AppleE1000e v3.1.0a
Disk
Intel Generic AHCI SATA
MISC
EvOreboot
FackeSMC v6.14.1364
USB 3.0 Universal
CUSTOMIZE
PCI Root ID Fix
IGPEabler=No
Hibernate Mode - Desktop
Hope this Helps.
Jeremiah
Last edited: