- Joined
- May 4, 2015
- Messages
- 24
- Motherboard
- GIGABYTE X99-UD4
- CPU
- i7-5820K
- Graphics
- gtx 1060 6gb
- Mac
- Mobile Phone
Hello There !
i7 2600K
asus p8p67 asus
evo ssd samsung 240gb
16gb ram
evga 740sc
uad2
rme fireface
This system was working perfectly fine on Yosemite 10.3 all was instaled like here ( https://www.youtube.com/watch?v=FBbm7vRct34) (in multobeast i have only check the "boot" system mac 5.1 , i7 sandy bridke overclocked, and chimera instaler nothing else) , today i have added a TP LINK WN881ND to my system and installed/ enabled wi-fi like in this video: https://www.youtube.com/watch?v=-ecw7AdPPJE
instlation went like this: i have added those kext once (first Atheros and then io80211family kext ) system was booting but without wi-fi so i installed this again but exacly the same like in video and after this system cant boot. it freez at apple white screen logo with loading bar.
so i have put the yosemite usb instaler and booted this with -f and all works fine , also booted with -x and deleted those kext what i have added before.
So i run multibeast again and run like normal instalation like in first video, after this -x, -f works like before But system still dont boot normaly , still stuck on loading logo ;( and now have no idea what to do and how to restore system before my stupid wi-fi instalation can any one help me ?
here is the photo of booting with -x
update:
-f from ssd works fine, but still no clue how to run in normal mode any idea?
-s dosent work at all i can see the log becouse its to fast to capture anything
- i have installed kext "NullCPUPowerManagement" from my mobo instal pack (like at the first instlation of yosemite) this did not solve tyhe problem
fixed:
answeere here :
http://www.tonymacx86.com/network/1...dding-tp-link-card-new-kexts-please-help.html
i7 2600K
asus p8p67 asus
evo ssd samsung 240gb
16gb ram
evga 740sc
uad2
rme fireface
This system was working perfectly fine on Yosemite 10.3 all was instaled like here ( https://www.youtube.com/watch?v=FBbm7vRct34) (in multobeast i have only check the "boot" system mac 5.1 , i7 sandy bridke overclocked, and chimera instaler nothing else) , today i have added a TP LINK WN881ND to my system and installed/ enabled wi-fi like in this video: https://www.youtube.com/watch?v=-ecw7AdPPJE
instlation went like this: i have added those kext once (first Atheros and then io80211family kext ) system was booting but without wi-fi so i installed this again but exacly the same like in video and after this system cant boot. it freez at apple white screen logo with loading bar.
so i have put the yosemite usb instaler and booted this with -f and all works fine , also booted with -x and deleted those kext what i have added before.
So i run multibeast again and run like normal instalation like in first video, after this -x, -f works like before But system still dont boot normaly , still stuck on loading logo ;( and now have no idea what to do and how to restore system before my stupid wi-fi instalation can any one help me ?
here is the photo of booting with -x
update:
-f from ssd works fine, but still no clue how to run in normal mode any idea?
-s dosent work at all i can see the log becouse its to fast to capture anything
- i have installed kext "NullCPUPowerManagement" from my mobo instal pack (like at the first instlation of yosemite) this did not solve tyhe problem
fixed:
answeere here :
http://www.tonymacx86.com/network/1...dding-tp-link-card-new-kexts-please-help.html
Last edited: